| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-6.3E-A | Cage Type:CR - Phenolic Outer; da - Inner Ring Backing Diameter:40.600 mm; Ball Type:STEEL; Limiting Speed (Oil):40600 rpm; Bearing Width:14 mm; Precision Class:ISO P4S (ABEC 7/9); C0 - Static Radial Rating:13000 N; r - Outer Ring To Clear Radius3:1.0 mm; Da - Outer Ring Backing Diameter:56.600 mm; R - Inner Ring To Clear Radius2:1.0 mm; |
| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-5E-A | s1:48 mm; e:23.8 mm; Recommended tightening torque for set screw:33 Nm; L:235 mm; Designation of bearing:UC218G2L3; A:45 mm; B:96 mm; d:90 mm; S:39.7 mm; A2:80.1 mm; |
| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-8F-A | C:15 mm; Brand:NTN; Lw:8.3 mm; Product Group:B04144; D:14 mm; Minimum Buy Quantity:N/A; Max operating temperature, Tmax:120 °C; C0r:9.4 kN; Characteristic inner ring frequency, BPFI:8.48 Hz; Nlim (grease):16,000 rpm; |
| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-8-A | A5:30.2 mm; L3:83 mm; d:45 mm; Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; H1:102 mm; T max.:200 °C; L1:87 mm; N:29mm; S:19 mm; |
| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-4L-A | Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:2.61 Hz; f0:12.6; d:25 mm; Characteristic inner ring frequency, BPFI:4.39 Hz; ra max:1 mm; Mass:0.23 kg; rs min:1.1 mm; Fatigue limit load, Cu:0.5 kN; da min:31.5 mm; |
| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-6.3F-A | T min.:-40 °C; A5:34.1 mm; SW:4.76 mm; s1:57.6 mm; Designation of housing:C214-; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; C:62 kN; S:34.1 mm; H:150 mm; |
| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-6.3L-A | Dynamic load, C:5.1 kN; Characteristic outer ring frequency, BPF0:3.07 Hz; Rolling Element:Ball Bearing; f0:13.2; Da max:26 mm; Characteristic rolling element frequency, BSF:4.07 Hz; UNSPSC:31171504; da min:14 mm; Min operating temperature, Tmin:-25 °C; Harmonized Tariff Code:8482.10.50.68; |
| Japan imported the original SUMITOMO QT22 Series Gear Pump QT22-5F-A | Bearing Number:22215; Dimension N:2.930 in; Engineering Group:Mounted Bearing; e - Geometry Factor:0.22; Dimension L Exp:3.85 in; Dimension M:2.37 in; Housing Style:Four-Bolt Square Fla; Grease Lubrication - B/C/O Seal:1300 rpm; Locking Style:Double Concentric; Shaft Tolerance:0.0020 in; |