Yuken PV2R2-53-F-LAA-4222 Vane pump PV2R Series	A2:46.1 mm; e:16 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX305G2L3; C0:11.5 kN; C:22.36 kN; Designation of housing:F305-; G:M6x1; T max.:100 °C; d1:42.8 mm;
Yuken PV2R1-14-L-RAA-43 Vane pump PV2R Series	Cup Part Number:HM237513; C1 - Dynamic Radial Rating (1 million revolutions)5:219000 lbf; Da - Cup Frontface Backing Diameter:272.00 mm; D:289.974 mm; B:63.503 mm; Bearing Weight:17.00 Kg; Cg - Geometry Factor:0.117; Ab - Cage-Cone Frontface Clearance:5.1 mm; B - Cone Width:63.5 mm; C0 - Static Radial Rating:278000 lbf;
Yuken PV2R34-94-237-F-REAA-3190 Vane pump PV2R Series	B:53.7 mm; A2:68.8 mm; S:14.9 mm; C0:32.8 kN; H3:130; Weight:3.5 kg; e:30 mm; H:238 mm; J:202 mm; A:49 mm;
Yuken PV2R1-17-F-LAA-4222 Vane pump PV2R Series	Cup Part Number:HM237513; C1 - Dynamic Radial Rating (1 million revolutions)5:219000 lbf; Da - Cup Frontface Backing Diameter:272.00 mm; D:289.974 mm; B:63.503 mm; Bearing Weight:17.00 Kg; Cg - Geometry Factor:0.117; Ab - Cage-Cone Frontface Clearance:5.1 mm; B - Cone Width:63.5 mm; C0 - Static Radial Rating:278000 lbf;
Yuken PV2R13-31-116-F-RAAA-41 Vane pump PV2R Series	Min operating temperature, Tmin:-20 °C; d:85 mm; B:41 mm; Characteristic rolling element frequency, BSF:4.16 Hz; Nlim:2,700 rpm; ra max:2.5 mm; Static load, C0:96.8 kN; Fatigue limit load, Cu:3.8 kN; f0:13.3; Da max:167 mm;
Yuken PV2R2-59-F-LAB-4222 Vane pump PV2R Series	Bearing I.D. d(mm):12; Width T(mm):25; Holder Surface Treatment:Not Provided; Type:Bearings with Housin; Flange Shape:Round Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; RoHS:6; Seals:VV (Non-Contact Rubb;
Yuken PV2R1-25-F-RAR-43 Vane pump PV2R Series	A1:36 mm; C:35.1 kN; Designation of open end cover:SCO210-45; G:M6x1; H:55.6 mm; Designation of closed end cover:SCC210; Adapter sleeve reference:H2310; T min.:-20 °C; s1:27.5 mm; N1:27 mm;
Yuken PV2R13-19-116-F-RAAA-4190 Vane pump PV2R Series	Basic Load Rating, Dynamic Rating(N):104000; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):68200; Bearing Unit, Type:Square flange shape; Fit:J7; Rolling Element Material:Bearing Steel; Seal:Silicone; Surface Treatment:No; Unit, Type:Insert Bearing Unit;