Atos PFED Series Vane pump PFEX2-51150/51150/3DW 23	N:17mm; H1:20 mm; C0:20.8 kN; Designation of open end cover:SCOE209-45; d1:63.5 mm; C:25.7 kN; Designation of housing:SP209N-; Z:82.5 mm; S:9.5 mm; A:54 mm;
Atos PFED Series Vane pump PFED-54110/056/1DTO	Dimension N:3.400 in; C - Dynamic Load (Basic):79700 lb; Shaft Size Type:Imperial; Engineering Group:Mounted Bearing; Pre Install Clearance Max:0.0039 in; UPC Code:0883450021401; Dimension RAA:0.99 in; Dimension E:6.72 in; Dimension L Exp:4.27 in; Dimension BC:9.5 in;
Atos PFED Series Vane pump PFED-54090/070/3DUF	Bearing Part Number:6201; Flange O.D. H(φ):56; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Width T(mm):40; RoHS:6; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Material:[Steel] Steel;
Atos PFED Series Vane pump PFEX2-42045/31022/3DT 21	a - Effective Center Location4:-0.26 in; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:3.11 in; B - Cone Width:1.1875 in; C0 - Static Radial Rating:50300 lbf; G1 - Heat Generation Factor (Roller-Raceway):84.3; K - Factor8:1.72; Aa - Cage-Cone Backface Clearance:0.05 in; R - Cone Backface To Clear Radius3:0.14 in; Cone Part Number:39585P;
Atos PFED Series Vane pump PFED-54110/056/3DWB 21	d:88.9 mm; B1:72.5 mm; Recommended tightening torque for set screw:27.1 Nm; m:9.5 mm; C0:71.5 kN; B2:24 mm; S:24.5 mm; G:7/16-20UNF; SW:5.56 mm; C:37 mm;
Atos PFED Series Vane pump PFED-54150/085/1SVO	Dimension N:3.400 in; C - Dynamic Load (Basic):79700 lb; Shaft Size Type:Imperial; Engineering Group:Mounted Bearing; Pre Install Clearance Max:0.0039 in; UPC Code:0883450021401; Dimension RAA:0.99 in; Dimension E:6.72 in; Dimension L Exp:4.27 in; Dimension BC:9.5 in;
Atos PFED Series Vane pump PFED-43029/016/1SWO	N:17mm; H1:20 mm; C0:20.8 kN; Designation of open end cover:SCOE209-45; d1:63.5 mm; C:25.7 kN; Designation of housing:SP209N-; Z:82.5 mm; S:9.5 mm; A:54 mm;
Atos PFED Series Vane pump PFEX2-32036/31022/3DT	Basic Load Rating, Static Rating(N):21300; Stroke:No; RoHS:6; Rolling Element Material:Bearing Steel; Surface Treatment:No; Machining:No; Unit Body Material:Cast Iron; Fit:J7; Accessory:With steel plate cov;