Vickers PVB6-RS40-CC12 Variable piston pumps PVB Series	Designation of housing:SP208-210/90N-; H2:61 mm; A:31 mm; B:30.2 mm; Weight:3.8 kg; C:35.1 kN; T min.:-40 °C; T max.:100 °C; L1:260 mm; B1:43.7 mm;
Vickers PVB15-LSY-31-CVP-11 Variable piston pumps PVB Series	s1:15.5 mm; A2:33.3 mm; T max.:100 °C; J1:40 mm; Recommended tightening torque for set screw:5.5 Nm; e:15 mm; Weight:0.53 kg; C:12.8 kN; Designation of bearing:UC202G2; T min.:-20 °C;
Vickers PVB29-LS-20-CM-11 Variable piston pumps PVB Series	Snap Ring:No; Da max:31 mm; da min:19 mm; Radial clearance class:C3; Characteristic inner ring frequency, BPFI:4.39 Hz; EAN:4547359557640; Mass:0.04 kg; Minimum Buy Quantity:N/A; d:15 mm; Nlim (grease):15,000 rpm;
Vickers PVB6-LSW-20-CMC-11-PRC Variable piston pumps PVB Series	J:78 mm; N:12mm; e:10 mm; H3:62; A1:6 mm; S:12.7 mm; Designation of open end cover:SCO204-17; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; s1:15.5 mm;
Vickers PVB5-RSW-21-CC-11-PRC Variable piston pumps PVB Series	Da - Outer Ring Backing Diameter:1097.300 mm; R - Inner Ring To Clear Radius1:9.000 mm; Reference Thermal Speed Rating (Grease):160; e - ISO Factor3:0.35; B - Outer Ring Width:438.000 mm; Cage Type:YMD; Cg - Geometry Factor8:0.1256; C1(2) - Dynamic Radial Rating (Two-Rows):18800000 N; Y0 - ISO Factor4:1.95; Y1 - ISO Factor5:2.91;
Vickers PVB45-FRSF-20-C-11-PRC            Variable piston pumps PVB Series	Days to Ship:7 Days; Holder Surface Treatment:Clear Anodize; RoHS:6; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type; Flange O.D. H(φ):47; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel;
Vickers PVB29-RS-20-CG-20           Variable piston pumps PVB Series	Y2 - Geometry Factor:3.67; Dimension BC:4.38 in; Dimension C:2.380 in; Dimension R:0.15 in; Shaft Size Type:Imperial; Full Timken Part Number:QMC08J108SB; Y1 - Geometry Factor:2.47; Dimension G:3.625 in; Weight:8.00 lb; UPC Code:0883450058322;
Vickers PVB29-RSY-31-C-11 Variable piston pumps PVB Series	J:78 mm; N:12mm; e:10 mm; H3:62; A1:6 mm; S:12.7 mm; Designation of open end cover:SCO204-17; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; s1:15.5 mm;