NACHI VDC-2A-1A2-20 VDC Series Hydraulic Vane Pumps	N1:24.5 mm; C:19.5 kN; Recommended tightening torque for set screw:3.7 Nm; H1:14.5 mm; L:161.5 mm; A:41.5 mm; Designation of closed end cover:SCC206; H:39.7 mm; A1:27.5 mm; B:38.1 mm;
NACHI VDC-2A-1A3-E20 VDC Series Hydraulic Vane Pumps	Nref:14,000 rpm; D1:49.2 mm; f0:13.9; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.4 Hz; Da max:47 mm; Fatigue limit load, Cu:0.45 kN; Static load, C0:7.9 kN; Characteristic inner ring frequency, BPFI:5.42 Hz; da max:31.8 mm;
NACHI VDC-1B-1A4-E35 VDC Series Hydraulic Vane Pumps	J:94.5 mm; Z:45.1 mm; C0:6.65 kN; T min.:-40 °C; A1:22.5 mm; Designation of open end cover:SCO204-15; A:32 mm; Recommended tightening torque for set screw:5.5 Nm; B:31 mm; N1:17 mm;
NACHI VDC-12A-1A3-2A3-20 VDC Series Hydraulic Vane Pumps	Limiting Speed (Grease):9000 rpm; Contact Angle:25 º; d:100 mm; Design Units:METRIC; Ball Type:Ceramic; C0 - Static Radial Rating:65326 N; da - Inner Ring Backing Diameter:109.900 mm; R - Inner Ring To Clear Radius2:1.5 mm; Cage Type:CR - Phenolic Outer; D:150 mm;
NACHI VDC-12B-1A5-1A5-20 VDC Series Hydraulic Vane Pumps	Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Seals:DD (Contact Rubber S; Shape:Flange Type; Type:Bearings with Housin;
NACHI VDC-2A-1A4-20 VDC Series Hydraulic Vane Pumps	J:94.5 mm; Z:45.1 mm; C0:6.65 kN; T min.:-40 °C; A1:22.5 mm; Designation of open end cover:SCO204-15; A:32 mm; Recommended tightening torque for set screw:5.5 Nm; B:31 mm; N1:17 mm;
NACHI VDC-2B-1A5-E35 VDC Series Hydraulic Vane Pumps	Dimension E:6.38 in; Grease Lubrication - T Seal:900 rpm; Dimension H:1.03 in; Dimension B Exp:2.70 in; UPC Code:0883450091404; Dimension F:14.75 in; e - Geometry Factor:0.25; Dimension D:10.50 in; Float:0.083 in; Dimension G:11.000 in;
NACHI VDC-2B-1A2-20 VDC Series Hydraulic Vane Pumps	Limiting Speed (Grease):9000 rpm; Contact Angle:25 º; d:100 mm; Design Units:METRIC; Ball Type:Ceramic; C0 - Static Radial Rating:65326 N; da - Inner Ring Backing Diameter:109.900 mm; R - Inner Ring To Clear Radius2:1.5 mm; Cage Type:CR - Phenolic Outer; D:150 mm;