| NACHI VDC-2B-1A3-20 VDC Series Hydraulic Vane Pumps | Limiting Speed (Grease):9000 rpm; Contact Angle:25 º; d:100 mm; Design Units:METRIC; Ball Type:Ceramic; C0 - Static Radial Rating:65326 N; da - Inner Ring Backing Diameter:109.900 mm; R - Inner Ring To Clear Radius2:1.5 mm; Cage Type:CR - Phenolic Outer; D:150 mm; |
| NACHI VDC-12B-1A5-1A5-20 VDC Series Hydraulic Vane Pumps | Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Seals:DD (Contact Rubber S; Shape:Flange Type; Type:Bearings with Housin; |
| NACHI VDC-13A-1A5-1A3-20 VDC Series Hydraulic Vane Pumps | Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing I.D. d(mm):12; Bearing Part Number:6001; Width T(mm):21; Housing Material:304 Stainless Steel; Number of Bearings:Double; Flange O.D. H(φ):52; Bearing Material:Stainless Steel; |
| NACHI VDC-1A-1A4-E20 VDC Series Hydraulic Vane Pumps | J:94.5 mm; Z:45.1 mm; C0:6.65 kN; T min.:-40 °C; A1:22.5 mm; Designation of open end cover:SCO204-15; A:32 mm; Recommended tightening torque for set screw:5.5 Nm; B:31 mm; N1:17 mm; |
| NACHI VDC-12A-1A5-2A3-20 VDC Series Hydraulic Vane Pumps | Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):119000; RoHS:6; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Grease Type:Standard Grease; Accessory:With cast iron cover; |
| NACHI VDC-3A-1A3-20 VDC Series Hydraulic Vane Pumps | Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):119000; RoHS:6; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Grease Type:Standard Grease; Accessory:With cast iron cover; |
| NACHI VDC-3B-1A2-20 VDC Series Hydraulic Vane Pumps | Nref:14,000 rpm; D1:49.2 mm; f0:13.9; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.4 Hz; Da max:47 mm; Fatigue limit load, Cu:0.45 kN; Static load, C0:7.9 kN; Characteristic inner ring frequency, BPFI:5.42 Hz; da max:31.8 mm; |
| NACHI VDC-1A-2A2-20 VDC Series Hydraulic Vane Pumps | Dimension E:6.38 in; Grease Lubrication - T Seal:900 rpm; Dimension H:1.03 in; Dimension B Exp:2.70 in; UPC Code:0883450091404; Dimension F:14.75 in; e - Geometry Factor:0.25; Dimension D:10.50 in; Float:0.083 in; Dimension G:11.000 in; |