| NACHI VDC-2B-2A3-E35 VDC Series Hydraulic Vane Pumps | Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):119000; RoHS:6; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Grease Type:Standard Grease; Accessory:With cast iron cover; |
| NACHI VDC-3B-1A2-20 VDC Series Hydraulic Vane Pumps | d:30.16 mm; J:95 mm; Designation of housing:F306-; C:27 kN; G:M6x1; Designation of bearing:EX306-19G2T20; A2:50.5 mm; Weight:1.68 kg; B1:50 mm; S:17.5 mm; |
| NACHI VDC-3A-1A3-20 VDC Series Hydraulic Vane Pumps | Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):119000; RoHS:6; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Grease Type:Standard Grease; Accessory:With cast iron cover; |
| NACHI VDC-2B-1A4-20 VDC Series Hydraulic Vane Pumps | d:30.16 mm; J:95 mm; Designation of housing:F306-; C:27 kN; G:M6x1; Designation of bearing:EX306-19G2T20; A2:50.5 mm; Weight:1.68 kg; B1:50 mm; S:17.5 mm; |
| NACHI VDC-1B-2A2-20 VDC Series Hydraulic Vane Pumps | Limiting Speed (Grease):9000 rpm; Contact Angle:25 º; d:100 mm; Design Units:METRIC; Ball Type:Ceramic; C0 - Static Radial Rating:65326 N; da - Inner Ring Backing Diameter:109.900 mm; R - Inner Ring To Clear Radius2:1.5 mm; Cage Type:CR - Phenolic Outer; D:150 mm; |
| NACHI VDC-12A-1A3-2A3-20 VDC Series Hydraulic Vane Pumps | Dimension E:6.38 in; Grease Lubrication - T Seal:900 rpm; Dimension H:1.03 in; Dimension B Exp:2.70 in; UPC Code:0883450091404; Dimension F:14.75 in; e - Geometry Factor:0.25; Dimension D:10.50 in; Float:0.083 in; Dimension G:11.000 in; |
| NACHI VDC-3B-1A4-E20 VDC Series Hydraulic Vane Pumps | Nref:14,000 rpm; D1:49.2 mm; f0:13.9; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.4 Hz; Da max:47 mm; Fatigue limit load, Cu:0.45 kN; Static load, C0:7.9 kN; Characteristic inner ring frequency, BPFI:5.42 Hz; da max:31.8 mm; |
| NACHI VDC-3B-1A5-20 VDC Series Hydraulic Vane Pumps | N1:24.5 mm; C:19.5 kN; Recommended tightening torque for set screw:3.7 Nm; H1:14.5 mm; L:161.5 mm; A:41.5 mm; Designation of closed end cover:SCC206; H:39.7 mm; A1:27.5 mm; B:38.1 mm; |