| NACHI VDC-12A-2A3-1A5-20 VDC Series Hydraulic Vane Pumps | Dimension E:6.38 in; Grease Lubrication - T Seal:900 rpm; Dimension H:1.03 in; Dimension B Exp:2.70 in; UPC Code:0883450091404; Dimension F:14.75 in; e - Geometry Factor:0.25; Dimension D:10.50 in; Float:0.083 in; Dimension G:11.000 in; |
| NACHI VDC-2A-1A2-20 VDC Series Hydraulic Vane Pumps | Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Seals:VV (Non-Contact Rubb; Number of Bearings:Single; RoHS:6; Shape:Bottom Mount; Width T(mm):19; Height H(mm):40 ～ 60; Bearing Used:Deep Groove Ball Bea; |
| NACHI VDC-2A-1A2-20 VDC Series Hydraulic Vane Pumps | N1:24.5 mm; C:19.5 kN; Recommended tightening torque for set screw:3.7 Nm; H1:14.5 mm; L:161.5 mm; A:41.5 mm; Designation of closed end cover:SCC206; H:39.7 mm; A1:27.5 mm; B:38.1 mm; |
| NACHI VDC-3B-1A2-20 VDC Series Hydraulic Vane Pumps | Nref:14,000 rpm; D1:49.2 mm; f0:13.9; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.4 Hz; Da max:47 mm; Fatigue limit load, Cu:0.45 kN; Static load, C0:7.9 kN; Characteristic inner ring frequency, BPFI:5.42 Hz; da max:31.8 mm; |
| NACHI VDC-1B-1A3-20 VDC Series Hydraulic Vane Pumps | Characteristic rolling element frequency, BSF:4.71 Hz; Radial clearance class:C4; E:106.5 mm; rs min:2 mm; Characteristic outer ring frequency, BPF0:5.18 Hz; da max:69 mm; Nlim (oil):6,300 rpm; d:55 mm; r1a max:2 mm; D:120 mm; |
| NACHI VDC-2B-1A3-20 VDC Series Hydraulic Vane Pumps | Limiting Speed (Grease):9000 rpm; Contact Angle:25 º; d:100 mm; Design Units:METRIC; Ball Type:Ceramic; C0 - Static Radial Rating:65326 N; da - Inner Ring Backing Diameter:109.900 mm; R - Inner Ring To Clear Radius2:1.5 mm; Cage Type:CR - Phenolic Outer; D:150 mm; |
| NACHI VDC-2A-1A5-E20 VDC Series Hydraulic Vane Pumps | Lubrication method:Oil Supply Type; Days to Ship:Quote; Bearing Inner Dia. Shape:Cylindrical Bore Set; Surface Treatment:No; Bearing Unit, Type:Square flange shape; Temperature Properties:Standard; Basic Load Rating, Dynamic Rating(N):12800; Unit, Type:Bearing unit; Unit Body Material:Cast Iron; |
| NACHI VDC-2A-1A2-20 VDC Series Hydraulic Vane Pumps | N1:24.5 mm; C:19.5 kN; Recommended tightening torque for set screw:3.7 Nm; H1:14.5 mm; L:161.5 mm; A:41.5 mm; Designation of closed end cover:SCC206; H:39.7 mm; A1:27.5 mm; B:38.1 mm; |