Atos PVPC-CZ-4 PVPC Series Piston pump	Y2 - ISO Factor10:3.67; T - Bearing Width across Cones:2.6250 in; G1 - Heat Generation Factor (Roller-Raceway)11:23.6; B - Cone Width:0.9983 in; Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8500 lbf; G2 - Heat Generation Factor (Rib-Roller End):9.63; D:2.7500 in; Da - Cup Frontface Backing Diameter:2.56 in; db - Cone Backface Backing Diameter:1.73 in;
Atos PVPC-C-5073/1S 10 10 PVPC Series Piston pump	C0:20.8 kN; C:31.85 kN; Recommended tightening torque for set screw:8 Nm; L1:90 mm; Designation of housing:FA209N-; L:108 mm; J1:72 mm; A1:18 mm; Z:34.8 mm; Weight:1.87 kg;
Atos PVPC-C-3029/1D 11 /WG PVPC Series Piston pump	Surface Treatment:No; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Fit:J7; Grease Type:SH44M; Seal:Silicone; Diameter series symbol:Used for Light load; Machining:No;
Atos PVPC-SLE-3029/10 PVPC Series Piston pump	Surface Treatment:No; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Fit:J7; Grease Type:SH44M; Seal:Silicone; Diameter series symbol:Used for Light load; Machining:No;
Atos PVPCX2E-C-3029/31036/1D 10 PVPC Series Piston pump	Surface Treatment:No; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Fit:J7; Grease Type:SH44M; Seal:Silicone; Diameter series symbol:Used for Light load; Machining:No;
Atos PVPC-LZQZ-3029-1D PVPC Series Piston pump	Symbol of contact angle:No; Internal Symbol:No; Inner/Outer Ring Material:Steel; Precision Grade Symbol:P5; Format:Standard; Retainer Type:Punching; Holder Symbol:MB; Rolling Element Material:Steel; Raceway Ring Shape:Tapered Roller; Combination symbol:No;
Atos PVPC-SL-5 PVPC Series Piston pump	Symbol of contact angle:No; Internal Symbol:No; Inner/Outer Ring Material:Steel; Precision Grade Symbol:P5; Format:Standard; Retainer Type:Punching; Holder Symbol:MB; Rolling Element Material:Steel; Raceway Ring Shape:Tapered Roller; Combination symbol:No;
Atos PVPC-SLE-3029/10 20 PVPC Series Piston pump	Weight:1.46 kg; G:M6x1; S:18.8 mm; s1:36.3 mm; T min.:-20 °C; N:11,5mm; L:135 mm; Recommended tightening torque for set screw:8 Nm; B:37.6 mm; d:31.75 mm;