Yuken Pistonp Pump A Series A145-L-R-01-K-S-K-32	L:203.2 mm; s1:13.5 mm; Weight:0.56 kg; N:8,7mm; T min.:-40 °C; A1:23.4 mm; A:19 mm; N1:48,5; H:104.8 mm; d:25.4 mm;
Yuken Pistonp Pump A Series A220-F-L-01-C-S-K-32	Days to Ship:8 Days; Bearing Retained:No; Flange O.D. H(φ):104; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Seals:ZZ (Double Shield); Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; RoHS:6;
Yuken Pistonp Pump A Series A145-L-L-01-B-S-K-32	Static load, C0:97.5 kN; d1:59.5 mm; Brand:NTN; Nlim (oil):6,400 rpm; Characteristic cage frequency, FTF:0.43 Hz; Dynamic load, C:76.5 kN; Mass:0.53 kg; B:25.4 mm; Min operating temperature, Tmin:-40 °C; a:16.41 mm;
Yuken Pistonp Pump A Series A37-L-R-01-H-K-32	Static load, C0:97.5 kN; d1:59.5 mm; Brand:NTN; Nlim (oil):6,400 rpm; Characteristic cage frequency, FTF:0.43 Hz; Dynamic load, C:76.5 kN; Mass:0.53 kg; B:25.4 mm; Min operating temperature, Tmin:-40 °C; a:16.41 mm;
Yuken Pistonp Pump A Series A70-F-R-04-H-S-K-32	A2:68.7 mm; C:52.5 kN; Recommended tightening torque for set screw:16.8 Nm; T min.:-40 °C; J:143 mm; A:48 mm; B:65.1 mm; T max.:100 °C; e:29 mm; L:175 mm;
Yuken Pistonp Pump A Series A56-F-L-01-C-S-K-32	Outside Diameter D:120.000 mm; Grease Reference Speed:6700 rpm; Bore Size d:55 mm; Features:O.D. Groove; Clearance:C0 (Normal); Weight:1.350 Kg; Oil Reference Speed:10000 rpm; C0r - Static Load Rating:44.6 kN; Radius Rs min:2.000 mm; Cr - Dynamic Load Rating:71.5 kN;
Yuken Pistonp Pump A Series A90-F-R-01-H-S-60	Designation of housing:FCE207-; G:M6x1; Recommended tightening torque for set screw:8 Nm; N:11,5mm; A1:10 mm; Weight:1.25 kg; A:21 mm; T min.:-20 °C; Designation of bearing:UC207-23G2T20; J:110 mm;
Yuken Pistonp Pump A Series A56-F-L-01-H-S-K-32	Aa - Cage-Cone Backface Clearance:0.3 mm; Design Units:Imperial; db - Cone Backface Backing Diameter:43.43 mm; Cg - Geometry Factor:0.0666; Y - ISO Factor9:1.59; C1 - Dynamic Radial Rating (1 million revolutions)5:14500 lbf; G1 - Heat Generation Factor (Roller-Raceway):18; da - Cone Frontface Backing Diameter:39.88 mm; G2 - Heat Generation Factor (Rib-Roller End):10.6; K - Factor7:1.55;