NACHI IPH-6B-100 IPH Series Hydraulic Gear Pumps	Bolt Hole Width N:22.2 mm; Dynamic Load Rating:15500 lbf; Shaft Size d:2.756 in; Center of Bearing from End S:37.4 mm; Static Load Rating:9890 lbf; Total Width A:3.5000 in; Dimension L1:106.9 mm; Base to Center Height H:95.25 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Length L:320.7 mm;
NACHI IPH-46B-32-100-TT-11 IPH Series Hydraulic Gear Pumps	Bearing Material:[Steel] Steel; Height H(mm):15 ～ 30; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Height Indication:Height Configurable; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):10; Bearing Part Number:6800;
NACHI IPH-5B-40-21 IPH Series Hydraulic Gear Pumps	Volume Discount:Available; Width T(mm):35; Number of Bearings:Double; Seals:ZZ (Double Shield); Bearing Material:Stainless Steel; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea;
NACHI IPH-45B-32-64-11 IPH Series Hydraulic Gear Pumps	Bolt Hole Width N:22.2 mm; Dynamic Load Rating:15500 lbf; Shaft Size d:2.756 in; Center of Bearing from End S:37.4 mm; Static Load Rating:9890 lbf; Total Width A:3.5000 in; Dimension L1:106.9 mm; Base to Center Height H:95.25 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Length L:320.7 mm;
NACHI IPH-4A-25-20 IPH Series Hydraulic Gear Pumps	Series:33000; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:8060 lbf; D:4.7244 in; d:2.8750 in; Y2 - ISO Factor10:2.31; Y1 - ISO Factor9:1.55; db - Cone Backface Backing Diameter:3.23 in; Da - Cup Frontface Backing Diameter:4.49 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Cone Part Number:33287A;
NACHI IPH-34B-13-20-11 IPH Series Hydraulic Gear Pumps	RoHS:6; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):10; Number of Bearings:Double; Type:Bearings with Housin; Width T(mm):30; Flange O.D. H(φ):54; Days to Ship:7 Days;
NACHI IPH-66B-100-100-11 IPH Series Hydraulic Gear Pumps	Designation of open end cover:SCOE207-35; A2:50.4 mm; C:25.7 kN; Recommended tightening torque for set screw:11.5 Nm; A:36 mm; Dz:80 mm; A1:12.5 mm; T min.:-20 °C; G:R1/8"; N:14mm;
NACHI IPH-4B-20-20 IPH Series Hydraulic Gear Pumps	Designation of open end cover:SCOE207-35; A2:50.4 mm; C:25.7 kN; Recommended tightening torque for set screw:11.5 Nm; A:36 mm; Dz:80 mm; A1:12.5 mm; T min.:-20 °C; G:R1/8"; N:14mm;