| NACHI IPH-46B-32-100-EE-11 IPH Series Hydraulic Gear Pumps | Unit, Type:Bearing unit; Days to Ship:7 Days or more; Bearing Unit, Type:Diamond Flange Shape; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:25; Flange Outside Diameter H(mm):96; |
| NACHI IPH-45A-25-40-E3610K IPH Series Hydraulic Gear Pumps | Series:33000; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:8060 lbf; D:4.7244 in; d:2.8750 in; Y2 - ISO Factor10:2.31; Y1 - ISO Factor9:1.55; db - Cone Backface Backing Diameter:3.23 in; Da - Cup Frontface Backing Diameter:4.49 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Cone Part Number:33287A; |
| NACHI IPH-25B-6.5-64-11 IPH Series Hydraulic Gear Pumps | Symbols of Lubrication Amount:No; Retainer Type:Momi removing; Raceway Ring Shape:Cylindrical Roller; Outer Ring:With Outer Ring; Specifications:Standard; I.D.(Ø):170; Outer Ring Type:Flat; Low Torque Specification:No; Symbol of contact angle:No; Precision Grade Symbol:No; |
| NACHI IPH-6B-80-LT-11 IPH Series Hydraulic Gear Pumps | Unit, Type:Bearing unit; Days to Ship:7 Days or more; Bearing Unit, Type:Diamond Flange Shape; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:25; Flange Outside Diameter H(mm):96; |
| NACHI IPH-4A-20 IPH Series Hydraulic Gear Pumps | Bearing number:NJ219-E-TVP2 + HJ219-E; Size (mm):95x170x32; Bore Diameter (mm):95; Outer Diameter (mm):170; Width (mm):32; d:95 mm; D:170 mm; B:32 mm; B1:9 mm; B2:14 mm; D1:148,6 mm; Da max:158 mm; d1:120,5 mm; da max:111 mm; da min:107 mm; dc min:123 mm; E:154,5 mm; F:112,5 mm; r1 min:2,1 mm; ra max:2,1 mm; rmin:2,1 mm; s:0,7 mm / Axial displacement facility from central position; - HJ219-E / Designation, L-section ring:HJ219E / Designation, Lsection ring; |
| NACHI IPH-35A-10-50-EEL-11 IPH Series Hydraulic Gear Pumps | Lubrication method:Oil Supply Type; Days to Ship:9 Days; d:55; Bearing Unit, Type:Pillow Type; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Bearing unit; Surface Treatment:No; Unit Body Material:Cast Iron; Rolling Element Material:Steel; Heat Resistant Characteristics:Standard; |
| NACHI IPH-3A-16 IPH Series Hydraulic Gear Pumps | Bolt Hole Width N:22.2 mm; Dynamic Load Rating:15500 lbf; Shaft Size d:2.756 in; Center of Bearing from End S:37.4 mm; Static Load Rating:9890 lbf; Total Width A:3.5000 in; Dimension L1:106.9 mm; Base to Center Height H:95.25 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Length L:320.7 mm; |
| NACHI IPH-4A-20-20 IPH Series Hydraulic Gear Pumps | Bearing Material:[Steel] Steel; Height H(mm):15 ～ 30; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Height Indication:Height Configurable; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):10; Bearing Part Number:6800; |