Atos PFE Series Vane pump PFE-42056/3DU	e:21 mm; T max.:100 °C; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; Z:34.8 mm; G:R1/8"; L:105 mm; T min.:-40 °C; s1:17 mm; A:37.5 mm;
Atos PFE Series Vane pump PFE-41070/2DT 20	A:70 mm; C:31.85 kN; C0:20.8 kN; Recommended tightening torque for set screw:8 Nm; S:19 mm; T min.:-40 °C; s1:24.6 mm; L:190 mm; N:17mm; H:105 mm;
Atos PFE Series Vane pump PFE-31022/1DU	Characteristic outer ring frequency, BPF0:19.61 Hz; Cr:42 kN; Minimum Buy Quantity:N/A; Fw:55 mm; Min operating temperature, Tmin:-20 °C; Mass:0.07 kg; Max operating temperature, Tmax:120 °C; C0r:108 kN; Dw:2.5 mm; Inventory:0.0;
Atos PFE Series Vane pump PFE-41056/1DU	d1:37.4 mm; J:80.2 mm; Designation of housing:PFE205-; A1:23.4 mm; A:19 mm; L:203.2 mm; J1:48.5 mm; N:8,7mm; H:104.8 mm; N1:48,5;
Atos PFE Series Vane pump PFE-41070/2DV 20	H1:150.0 mm; C0 Static Load Rating:1060; N1:42.00 mm; A1:150 mm; Seal Type:Taconite; Max Oil Speed:2600; G:M30; Locating Rings (width x OD):SR250X15; J:420 mm; A3:263 mm;
Atos PFE Series Vane pump PFE-51110/1DT 23	d1:37.4 mm; J:80.2 mm; Designation of housing:PFE205-; A1:23.4 mm; A:19 mm; L:203.2 mm; J1:48.5 mm; N:8,7mm; H:104.8 mm; N1:48,5;
Atos PFE Series Vane pump PFE-31036/3SV	Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8; Bearing Retained:Yes (with retaining; Bearing Part Number:628; Shape:Flange Type; Flange Shape:Compact Type; Width T(mm):13; Holder Surface Treatment:Clear Anodize;
Atos PFE Series Vane pump PFE-32028/3DV 20	Seals:VV (Non-Contact Rubb; Height H(mm):40 ～ 60; Bearing Part Number:6204; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu; Number of Bearings:Single; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):88;