Atos PFE Series Vane pump PFE-31022/1DW	A:33 mm; Weight:2.06 kg; A1:16 mm; Designation of bearing:US210G2T04; G:R1/8"; J:160 mm; e:19.2 mm; N:14mm; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:FTE210-;
Atos PFE Series Vane pump PFE-32036/3DT	Days to Ship:9 Days; Unit Body Material:Cast Iron; Unit, Type:Bearing unit; Surface Treatment:No; B:190; d:65; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Take-Up Type;
Atos PFE Series Vane pump PFE-31044/1DT	Characteristic outer ring frequency, BPF0:19.61 Hz; Cr:42 kN; Minimum Buy Quantity:N/A; Fw:55 mm; Min operating temperature, Tmin:-20 °C; Mass:0.07 kg; Max operating temperature, Tmax:120 °C; C0r:108 kN; Dw:2.5 mm; Inventory:0.0;
Atos PFE Series Vane pump PFE-31044/1DU 20	H1:150.0 mm; C0 Static Load Rating:1060; N1:42.00 mm; A1:150 mm; Seal Type:Taconite; Max Oil Speed:2600; G:M30; Locating Rings (width x OD):SR250X15; J:420 mm; A3:263 mm;
Atos PFE Series Vane pump PFE-31028/1ST/WG	Series:6500; d:3 in; C0 - Static Radial Rating:118000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:44600 lbf; G1 - Heat Generation Factor (Roller-Raceway):199; R - Cone Backface To Clear Radius3:0.25 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:172000 lbf; G2 - Heat Generation Factor (Rib-Roller End):33.5; Aa - Cage-Cone Backface Clearance:0.15 in; Cone Part Number:6575;
Atos PFE Series Vane pump PFE-31036/3SU	e:21 mm; T max.:100 °C; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; Z:34.8 mm; G:R1/8"; L:105 mm; T min.:-40 °C; s1:17 mm; A:37.5 mm;
Atos PFE Series Vane pump PFE-51110/1DU	Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8; Bearing Retained:Yes (with retaining; Bearing Part Number:628; Shape:Flange Type; Flange Shape:Compact Type; Width T(mm):13; Holder Surface Treatment:Clear Anodize;
Atos PFE Series Vane pump PFE-41070/1DV 20	C0:6.65 kN; S:12.7 mm; J:78 mm; T min.:-20 °C; N:10mm; H:102 mm; e:15 mm; s1:15.5 mm; G:M6x1; C:12.8 kN;