Atos PFE Series Vane pump PFE-31022/1DW	A:33 mm; Weight:2.06 kg; A1:16 mm; Designation of bearing:US210G2T04; G:R1/8"; J:160 mm; e:19.2 mm; N:14mm; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:FTE210-;
Atos PFE Series Vane pump PFE-51110/1DT	e:21 mm; T max.:100 °C; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; Z:34.8 mm; G:R1/8"; L:105 mm; T min.:-40 °C; s1:17 mm; A:37.5 mm;
Atos PFE Series Vane pump PFE-41045/1DW 20	Cg - Geometry Factor:0.225; Aa - Cage-Cone Backface Clearance:12.19 mm; G2 - Heat Generation Factor (Rib-Roller End):573.4; e - ISO Factor8:0.37; R - Cone Backface To Clear Radius1:10.410 mm; Bearing Weight:92.30 Kg; B:91.280 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:103000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:396000 lbf; G1 - Heat Generation Factor (Roller-Raceway):4809.1;
Atos PFE Series Vane pump PFE-41070/1DV	A:70 mm; C:31.85 kN; C0:20.8 kN; Recommended tightening torque for set screw:8 Nm; S:19 mm; T min.:-40 °C; s1:24.6 mm; L:190 mm; N:17mm; H:105 mm;
Atos PFE Series Vane pump PFE-41085/1DT	Characteristic outer ring frequency, BPF0:19.61 Hz; Cr:42 kN; Minimum Buy Quantity:N/A; Fw:55 mm; Min operating temperature, Tmin:-20 °C; Mass:0.07 kg; Max operating temperature, Tmax:120 °C; C0r:108 kN; Dw:2.5 mm; Inventory:0.0;
Atos PFE Series Vane pump PFE-42070/3DT	Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8; Bearing Retained:Yes (with retaining; Bearing Part Number:628; Shape:Flange Type; Flange Shape:Compact Type; Width T(mm):13; Holder Surface Treatment:Clear Anodize;
Atos PFE Series Vane pump PFE-52090/3DT 31	Shape:Flanged Pilot Type; Type:Bearings with Housin; Volume Discount:Available; Width T(mm):30; Flange O.D. H(φ):44; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing Material:[Steel] Steel; RoHS:6;
Atos PFE Series Vane pump PFE-41070/2DV 20	H1:150.0 mm; C0 Static Load Rating:1060; N1:42.00 mm; A1:150 mm; Seal Type:Taconite; Max Oil Speed:2600; G:M30; Locating Rings (width x OD):SR250X15; J:420 mm; A3:263 mm;