Atos PFE Series Vane pump PFE-31044/1DT | Characteristic outer ring frequency, BPF0:19.61 Hz; Cr:42 kN; Minimum Buy Quantity:N/A; Fw:55 mm; Min operating temperature, Tmin:-20 °C; Mass:0.07 kg; Max operating temperature, Tmax:120 °C; C0r:108 kN; Dw:2.5 mm; Inventory:0.0; |
Atos PFE Series Vane pump PFE-41056/1DU 20 | Shape:Flanged Pilot Type; Type:Bearings with Housin; Volume Discount:Available; Width T(mm):30; Flange O.D. H(φ):44; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing Material:[Steel] Steel; RoHS:6; |
Atos PFE Series Vane pump PFE-41045/1DT | d1:37.4 mm; J:80.2 mm; Designation of housing:PFE205-; A1:23.4 mm; A:19 mm; L:203.2 mm; J1:48.5 mm; N:8,7mm; H:104.8 mm; N1:48,5; |
Atos PFE Series Vane pump PFE-31016/1DU | Seals:VV (Non-Contact Rubb; Height H(mm):40 ~ 60; Bearing Part Number:6204; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu; Number of Bearings:Single; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):88; |
Atos PFE Series Vane pump PFE-31028/5DT | e:21 mm; T max.:100 °C; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; Z:34.8 mm; G:R1/8"; L:105 mm; T min.:-40 °C; s1:17 mm; A:37.5 mm; |
Atos PFE Series Vane pump PFE-41070/2DT 20 | Cg - Geometry Factor:0.225; Aa - Cage-Cone Backface Clearance:12.19 mm; G2 - Heat Generation Factor (Rib-Roller End):573.4; e - ISO Factor8:0.37; R - Cone Backface To Clear Radius1:10.410 mm; Bearing Weight:92.30 Kg; B:91.280 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:103000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:396000 lbf; G1 - Heat Generation Factor (Roller-Raceway):4809.1; |
Atos PFE Series Vane pump PFE-31016/5DW | e:21 mm; T max.:100 °C; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; Z:34.8 mm; G:R1/8"; L:105 mm; T min.:-40 °C; s1:17 mm; A:37.5 mm; |
Atos PFE Series Vane pump PFE-51090/1DU | Days to Ship:9 Days; Unit Body Material:Cast Iron; Unit, Type:Bearing unit; Surface Treatment:No; B:190; d:65; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Take-Up Type; |