| NACHI VDR-11A-2A2-2A3-22 VDR Series Hydraulic Vane Pumps | A2:44.4 mm; J:130 mm; A1:15 mm; Designation of closed end cover:SCC207; B:42.9 mm; A:33 mm; L:90 mm; C0:15.6 kN; d:34.92 mm; Dz:80 mm; |
| NACHI VDR-11A-1A2-1A2-22 VDR Series Hydraulic Vane Pumps | G2 - Heat Generation Factor (Rib-Roller End):47.2; D:115.000 mm; Cup Part Number:Y33015; C - Cup Width:25.500 mm; Series:33015; Db - Cup Backface Backing Diameter:103.89 mm; Design Units:METRIC; G1 - Heat Generation Factor (Roller-Raceway):109.4; Da - Cup Frontface Backing Diameter:110.00 mm; Y - ISO Factor4:2.01; |
| NACHI VDR-2A-1A3-13 VDR Series Hydraulic Vane Pumps | Characteristic outer ring frequency, BPF0:4.6 Hz; Static load, C0:10.3 kN; ra max:1 mm; Fatigue limit load, Cu:0.47 kN; Brand:NTN; da min:40 mm; f0:14.8; d:35 mm; Min operating temperature, Tmin:-25 °C; Characteristic inner ring frequency, BPFI:6.4 Hz; |
| NACHI VDR-1B-1A2-E22 VDR Series Hydraulic Vane Pumps | Locknut:KM12; Lockwasher:MB12; Bolt Qty:4; N:15 mm; Adapter Sleeve1:H312; H1:70.0 mm; Housing:FSNT 512-610; C0 Static Load Rating:174; Shaft Diameter d:55 mm; N1:20.00 mm; |
| NACHI VDR-2B-1A2-U-S13 VDR Series Hydraulic Vane Pumps | Other Features:Deep Groove | Stainl; Brand:NTN; Internal Special Features:No; Dynamic load, C:1.35 kN; Inventory:0.0; Inner Race Width:0 Inch | 0 Millimete; Maximum Capacity / Filling Slot:No; Category:Single Row Ball Bear; Enclosure:2 Metal Shields; Outside Diameter:0.591 Inch | 15 Mill; |
| NACHI VDR-1A-1A3-Q11-6124A VDR Series Hydraulic Vane Pumps | D:80 mm; da max:50.3 mm; Min operating temperature, Tmin:-20 °C; f0:14; Mass:0.37 kg; Characteristic cage frequency, FTF:0.4 Hz; Characteristic outer ring frequency, BPF0:3.61 Hz; Max operating temperature, Tmax:120 °C; Da max:73.5 mm; Nlim:5,700 rpm; |
| NACHI VDR-1B-2A3-U-6136B VDR Series Hydraulic Vane Pumps | L1:75 mm; B:49.2 mm; d:49.21 mm; A:75 mm; T max.:100 °C; C0:37.8 kN; H2:143 mm; Designation of bearing:EX310-31G2L3; d1:76.2 mm; Recommended tightening torque for set screw:16.8 Nm; |
| NACHI VDR-1B-2A3-U-22 VDR Series Hydraulic Vane Pumps | D:80 mm; da max:50.3 mm; Min operating temperature, Tmin:-20 °C; f0:14; Mass:0.37 kg; Characteristic cage frequency, FTF:0.4 Hz; Characteristic outer ring frequency, BPF0:3.61 Hz; Max operating temperature, Tmax:120 °C; Da max:73.5 mm; Nlim:5,700 rpm; |