PC27MR-2 Slew Drive Assembly 22L-26-27001	d:38.1 mm; S:21.4 mm; SW:3.97 mm; Designation of housing:C208-; d1:58 mm; Designation of bearing:EX208-24G2T04; G:M6x1; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; s1:39.7 mm;
PC95-1 Slew Drive Assembly 21D-60-16000	A1:22 mm; A:40 mm; H2:101 mm; H:70 mm; Designation of bearing:UC203G2L3; S:12.7 mm; s1:15.5 mm; B:31 mm; Recommended tightening torque for set screw:5.5 Nm; Dz:54 mm;
PC12R-8 Slew Drive Assembly 842140002	T max.:100 °C; H2:63.7 mm; Weight:0.63 kg; C:12.8 kN; Dz:54 mm; Designation of housing:PLE204N-; Designation of bearing:UC204-12G2; J:94.5 mm; Z:45.1 mm; B:31 mm;
PC30MR-2 Slew Drive Assembly 22L-26-21001	Ab - Cage-Cone Frontface Clearance:0.06 in; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)5:5210 lbf; Cg - Geometry Factor:0.0734; Cone Part Number:23690; B - Cone Width:1.0620 in; db - Cone Backface Backing Diameter:1.93 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:35000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20100 lbf; Aa - Cage-Cone Backface Clearance:0.05 in;
PW110R-1 Slew Drive Assembly 226-60-16100	Weight:1.38 kg; C0:37.8 kN; d2:50 mm; T max.:100 °C; D:110 mm; C1:9.9 mm; B:40 mm; T min.:-20 °C; C:32 mm;
PC07-2 Slew Drive Assembly 843000146	H2:91.5 mm; s1:21.45 mm; B:42.9 mm; Designation of bearing:UC207-20G2; C:25.7 kN; T min.:-20 °C; H1:16 mm; Designation of housing:PLE207N-; A:44.5 mm; L:166 mm;
PC95R-2 Slew Drive Assembly 21D-60-16021	d:38.1 mm; S:21.4 mm; SW:3.97 mm; Designation of housing:C208-; d1:58 mm; Designation of bearing:EX208-24G2T04; G:M6x1; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; s1:39.7 mm;
PC160LC-8 Slew Drive Assembly 21K-26-71100	T max.:100 °C; H2:63.7 mm; Weight:0.63 kg; C:12.8 kN; Dz:54 mm; Designation of housing:PLE204N-; Designation of bearing:UC204-12G2; J:94.5 mm; Z:45.1 mm; B:31 mm;