KOMATSU 23B-15-75131 SEAT	ra max:0.6 mm; Static load, C0:3.6 kN; Characteristic outer ring frequency, BPF0:2.61 Hz; Characteristic inner ring frequency, BPFI:4.39 Hz; da min:19 mm; Characteristic cage frequency, FTF:0.37 Hz; D:35 mm; Fatigue limit load, Cu:0.16 kN; d:15 mm; Dynamic load, C:7.75 kN;
KOMATSU 12Y-57-11213 SEAT BELT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;
KOMATSU 714-23-15142 VALVE SEAT	C0 Static Load Rating:371; A:120.00 mm; H1:95.0 mm; Cage Type:EJ; Seal:TA613; Adapter Sleeve1:H2313; UPC Code:999999999; A1:90 mm; Seal Type:Taconite; N:22 mm;
KOMATSU 09409-10001KF SEAT BELT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;
KOMATSU 56B-86-16722 SEAT	Weight:13.55 kg; C:96 kN; H:101.6 mm; T min.:-20 °C; N:27mm; B:96 mm; A:85 mm; s1:48 mm; T max.:100 °C; Designation of bearing:UC218G2L3;
KOMATSU 56B-86-26070 SEAT	Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm;
KOMATSU 22M-57-22130 OPERATOR'S SEAT	Dimension H2:16.3 in; Bolt Size:4 x M24; Maximum Speed:1600 rpm; Dimension H:7.126 in; Support Type:Four-Bolt Plummer Bl; Dimension L:22.0 in; Dimension M:7.0 in; Weight:216 lb; Cr - Dynamic Load Rating:118025 lbf; Bearing Type:Split Cylindrical Re;
KOMATSU 56D-15-35121 SEAT	L1:87 mm; Dz:95 mm; B:41.2 mm; H1:102 mm; C:31.85 kN; N:29mm; Weight:2.32 kg; T min.:-40 °C; A1:16 mm; Z:70.2 mm;