KOMATSU 8293-70-2433 SEAT	ra max:0.6 mm; Static load, C0:3.6 kN; Characteristic outer ring frequency, BPF0:2.61 Hz; Characteristic inner ring frequency, BPFI:4.39 Hz; da min:19 mm; Characteristic cage frequency, FTF:0.37 Hz; D:35 mm; Fatigue limit load, Cu:0.16 kN; d:15 mm; Dynamic load, C:7.75 kN;
KOMATSU 21U-54-51105 SEAT	A1:18 mm; A2:68.7 mm; A:48 mm; T min.:-20 °C; B:65.1 mm; G:M6x1; S:25.4 mm; Designation of bearing:UC212-36G2; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN;
KOMATSU 56B-15-16520 VALVE SEAT	A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm;
KOMATSU 426-46-32431 SEAT	Dimension H2:16.3 in; Bolt Size:4 x M24; Maximum Speed:1600 rpm; Dimension H:7.126 in; Support Type:Four-Bolt Plummer Bl; Dimension L:22.0 in; Dimension M:7.0 in; Weight:216 lb; Cr - Dynamic Load Rating:118025 lbf; Bearing Type:Split Cylindrical Re;
KOMATSU 6212-22-5840 SEAT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;
KOMATSU 8230-70-5141 SEAT	Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm;
KOMATSU 56B-86-26070 SEAT	Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm;
KOMATSU 3EB-50-51215KF SEAT	A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm;