KOMATSU 714-07-65410 SEAT	Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm;
KOMATSU 56D-15-15121 VALVE SEAT	C0 Static Load Rating:371; A:120.00 mm; H1:95.0 mm; Cage Type:EJ; Seal:TA613; Adapter Sleeve1:H2313; UPC Code:999999999; A1:90 mm; Seal Type:Taconite; N:22 mm;
KOMATSU 56B-86-26070 SEAT	A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm;
KOMATSU 273-54-63120 SEAT	A1:18 mm; A2:68.7 mm; A:48 mm; T min.:-20 °C; B:65.1 mm; G:M6x1; S:25.4 mm; Designation of bearing:UC212-36G2; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN;
KOMATSU 22M-57-21710 OPERATOR'S SEAT	d:140 mm; D:250 mm; m:460 mm; a:570 mm; l:180 mm; u:36 mm; b:175 mm; d2:137 mm; oil level:55 mm; Material of Housing:grey cast;
KOMATSU 8240-70-6241 SEAT	Dimension H2:16.3 in; Bolt Size:4 x M24; Maximum Speed:1600 rpm; Dimension H:7.126 in; Support Type:Four-Bolt Plummer Bl; Dimension L:22.0 in; Dimension M:7.0 in; Weight:216 lb; Cr - Dynamic Load Rating:118025 lbf; Bearing Type:Split Cylindrical Re;
KOMATSU ZSSA41946 SEAT	Weight:13.55 kg; C:96 kN; H:101.6 mm; T min.:-20 °C; N:27mm; B:96 mm; A:85 mm; s1:48 mm; T max.:100 °C; Designation of bearing:UC218G2L3;
KOMATSU 56B-15-16520 VALVE SEAT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;