| KOMATSU 418-960-3111 SEAT | Flange Width A1:36.00 mm; Bolt Hole Size N:19.00 mm; Weight:12.1 lb; Pilot Outside Diameter H3:145.00 mm; Shaft Size d:2.25 in; Dynamic Load Rating:12859 lbf; Adapter Sleeve Number1:HE2313; Pilot Width A3:14.00 mm; Center of Bearing from Housing End A2:16.00 mm; Total Height L:205.00 mm; |
| KOMATSU 8293-70-2433 SEAT | ra max:0.6 mm; Static load, C0:3.6 kN; Characteristic outer ring frequency, BPF0:2.61 Hz; Characteristic inner ring frequency, BPFI:4.39 Hz; da min:19 mm; Characteristic cage frequency, FTF:0.37 Hz; D:35 mm; Fatigue limit load, Cu:0.16 kN; d:15 mm; Dynamic load, C:7.75 kN; |
| KOMATSU 195-40-11112 SEAT | H:170 mm; A5:37.3 mm; SW:4.76 mm; T min.:-40 °C; A:48 mm; d1:110 mm; d:80.96 mm; B:74.6 mm; S:37.3 mm; B1:95.2 mm; |
| KOMATSU 56B-86-26070 SEAT | Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm; |
| KOMATSU 714-23-15130 VALVE SEAT | A1:18 mm; A2:68.7 mm; A:48 mm; T min.:-20 °C; B:65.1 mm; G:M6x1; S:25.4 mm; Designation of bearing:UC212-36G2; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN; |
| KOMATSU 208-62-86540 SEAT | Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm; |
| KOMATSU 22M-57-22311 SEAT | Dimension H2:16.3 in; Bolt Size:4 x M24; Maximum Speed:1600 rpm; Dimension H:7.126 in; Support Type:Four-Bolt Plummer Bl; Dimension L:22.0 in; Dimension M:7.0 in; Weight:216 lb; Cr - Dynamic Load Rating:118025 lbf; Bearing Type:Split Cylindrical Re; |
| KOMATSU 22N-57-52320 SEAT BELT | C0 Static Load Rating:371; A:120.00 mm; H1:95.0 mm; Cage Type:EJ; Seal:TA613; Adapter Sleeve1:H2313; UPC Code:999999999; A1:90 mm; Seal Type:Taconite; N:22 mm; |