KOMATSU 56B-86-26070 SEAT | A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm; |
KOMATSU 124-43-53140 SEAT | L1:87 mm; Dz:95 mm; B:41.2 mm; H1:102 mm; C:31.85 kN; N:29mm; Weight:2.32 kg; T min.:-40 °C; A1:16 mm; Z:70.2 mm; |
KOMATSU 208-70-83630 SEAT | A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm; |
KOMATSU 418-62-05000 SEAT | H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm; |
KOMATSU 2A5-57-11122 OPERATOR'S SEAT | Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Machining:No; Basic Load Rating, Static Rating(N):77200; RoHS:6; Bearing Inner Dia. Shape:Tapered hole adapter; d:65; Basic Load Rating, Dynamic Rating(N):113000; |
KOMATSU 21U-57-31110 OPERATOR'S SEAT | Flange Width A1:36.00 mm; Bolt Hole Size N:19.00 mm; Weight:12.1 lb; Pilot Outside Diameter H3:145.00 mm; Shaft Size d:2.25 in; Dynamic Load Rating:12859 lbf; Adapter Sleeve Number1:HE2313; Pilot Width A3:14.00 mm; Center of Bearing from Housing End A2:16.00 mm; Total Height L:205.00 mm; |
KOMATSU 208-62-86540 SEAT | Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm; |
KOMATSU 45C-1TM-2640KF SEAT | A1:18 mm; A2:68.7 mm; A:48 mm; T min.:-20 °C; B:65.1 mm; G:M6x1; S:25.4 mm; Designation of bearing:UC212-36G2; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN; |