KOMATSU 714-07-25310 VALVE SEAT | Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm; |
KOMATSU 21A-57-16110 SEAT | A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm; |
KOMATSU 56C-46-22200 SEAT | H:170 mm; A5:37.3 mm; SW:4.76 mm; T min.:-40 °C; A:48 mm; d1:110 mm; d:80.96 mm; B:74.6 mm; S:37.3 mm; B1:95.2 mm; |
KOMATSU 6212-22-5840 SEAT | L1:87 mm; Dz:95 mm; B:41.2 mm; H1:102 mm; C:31.85 kN; N:29mm; Weight:2.32 kg; T min.:-40 °C; A1:16 mm; Z:70.2 mm; |
KOMATSU 195-40-11112 SEAT | A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm; |
KOMATSU 23C-57-61200 OPERATOR'S SEAT | Weight:13.55 kg; C:96 kN; H:101.6 mm; T min.:-20 °C; N:27mm; B:96 mm; A:85 mm; s1:48 mm; T max.:100 °C; Designation of bearing:UC218G2L3; |
KOMATSU 154-57-12151 SEAT | Type:Bearings with Housin; Seals:DD (Contact Rubber S; Days to Ship:8 Days; Bearing I.D. d(mm):12; Volume Discount:Available; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; RoHS:6; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel; |
KOMATSU 14X-15-55511 VALVE SEAT | L1:87 mm; Dz:95 mm; B:41.2 mm; H1:102 mm; C:31.85 kN; N:29mm; Weight:2.32 kg; T min.:-40 °C; A1:16 mm; Z:70.2 mm; |