KOMATSU 8293-70-2443 SEAT | Weight:13.55 kg; C:96 kN; H:101.6 mm; T min.:-20 °C; N:27mm; B:96 mm; A:85 mm; s1:48 mm; T max.:100 °C; Designation of bearing:UC218G2L3; |
KOMATSU 419-57-51141 SEAT BELT | d:140 mm; D:250 mm; m:460 mm; a:570 mm; l:180 mm; u:36 mm; b:175 mm; d2:137 mm; oil level:55 mm; Material of Housing:grey cast; |
KOMATSU 258-60-25511 SEAT | ra max:0.6 mm; Static load, C0:3.6 kN; Characteristic outer ring frequency, BPF0:2.61 Hz; Characteristic inner ring frequency, BPFI:4.39 Hz; da min:19 mm; Characteristic cage frequency, FTF:0.37 Hz; D:35 mm; Fatigue limit load, Cu:0.16 kN; d:15 mm; Dynamic load, C:7.75 kN; |
KOMATSU 421-S99-3350 SPRING SEAT ASS | Flange Width A1:36.00 mm; Bolt Hole Size N:19.00 mm; Weight:12.1 lb; Pilot Outside Diameter H3:145.00 mm; Shaft Size d:2.25 in; Dynamic Load Rating:12859 lbf; Adapter Sleeve Number1:HE2313; Pilot Width A3:14.00 mm; Center of Bearing from Housing End A2:16.00 mm; Total Height L:205.00 mm; |
KOMATSU 22B-57-31921 SEAT BELT | H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm; |
KOMATSU 423-V88-5890 SEAT BELT | L1:87 mm; Dz:95 mm; B:41.2 mm; H1:102 mm; C:31.85 kN; N:29mm; Weight:2.32 kg; T min.:-40 °C; A1:16 mm; Z:70.2 mm; |
KOMATSU 21U-54-51304 SEAT | Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm; |
KOMATSU 20U-57-61230 SEAT BELT | A2:42 mm; Designation of closed end cover:SCC206; T max.:100 °C; C0:11.2 kN; Weight:1.12 kg; L:108 mm; B:30 mm; G:R1/8"; C:19.5 kN; A1:12 mm; |