KOMATSU YM172421-08600 SEAT	ra max:0.6 mm; Static load, C0:3.6 kN; Characteristic outer ring frequency, BPF0:2.61 Hz; Characteristic inner ring frequency, BPFI:4.39 Hz; da min:19 mm; Characteristic cage frequency, FTF:0.37 Hz; D:35 mm; Fatigue limit load, Cu:0.16 kN; d:15 mm; Dynamic load, C:7.75 kN;
KOMATSU 2A5-57-11122 OPERATOR'S SEAT	Type:Bearings with Housin; Seals:DD (Contact Rubber S; Days to Ship:8 Days; Bearing I.D. d(mm):12; Volume Discount:Available; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; RoHS:6; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel;
KOMATSU 23B-15-75131 SEAT	C0 Static Load Rating:371; A:120.00 mm; H1:95.0 mm; Cage Type:EJ; Seal:TA613; Adapter Sleeve1:H2313; UPC Code:999999999; A1:90 mm; Seal Type:Taconite; N:22 mm;
KOMATSU 56C-83-24190 SEAT	Flange Width A1:36.00 mm; Bolt Hole Size N:19.00 mm; Weight:12.1 lb; Pilot Outside Diameter H3:145.00 mm; Shaft Size d:2.25 in; Dynamic Load Rating:12859 lbf; Adapter Sleeve Number1:HE2313; Pilot Width A3:14.00 mm; Center of Bearing from Housing End A2:16.00 mm; Total Height L:205.00 mm;
KOMATSU ZSSA41946 SEAT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;
KOMATSU AS167487 SEAT	H:170 mm; A5:37.3 mm; SW:4.76 mm; T min.:-40 °C; A:48 mm; d1:110 mm; d:80.96 mm; B:74.6 mm; S:37.3 mm; B1:95.2 mm;
KOMATSU 714-23-15131 VALVE SEAT	Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Machining:No; Basic Load Rating, Static Rating(N):77200; RoHS:6; Bearing Inner Dia. Shape:Tapered hole adapter; d:65; Basic Load Rating, Dynamic Rating(N):113000;
KOMATSU 56B-57-51170 SEAT BELT	L1:87 mm; Dz:95 mm; B:41.2 mm; H1:102 mm; C:31.85 kN; N:29mm; Weight:2.32 kg; T min.:-40 °C; A1:16 mm; Z:70.2 mm;