KOMATSU 561-15-55136 SEAT	H:170 mm; A5:37.3 mm; SW:4.76 mm; T min.:-40 °C; A:48 mm; d1:110 mm; d:80.96 mm; B:74.6 mm; S:37.3 mm; B1:95.2 mm;
KOMATSU 09409-10001KF SEAT BELT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;
KOMATSU 198-15-45131 VALVE SEAT	Dimension H2:16.3 in; Bolt Size:4 x M24; Maximum Speed:1600 rpm; Dimension H:7.126 in; Support Type:Four-Bolt Plummer Bl; Dimension L:22.0 in; Dimension M:7.0 in; Weight:216 lb; Cr - Dynamic Load Rating:118025 lbf; Bearing Type:Split Cylindrical Re;
KOMATSU 154-57-12151 SEAT	Type:Bearings with Housin; Seals:DD (Contact Rubber S; Days to Ship:8 Days; Bearing I.D. d(mm):12; Volume Discount:Available; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; RoHS:6; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel;
KOMATSU 20Y-54-24391 SEAT	A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm;
KOMATSU 566-15-8L530 SEAT	Flange Width A1:36.00 mm; Bolt Hole Size N:19.00 mm; Weight:12.1 lb; Pilot Outside Diameter H3:145.00 mm; Shaft Size d:2.25 in; Dynamic Load Rating:12859 lbf; Adapter Sleeve Number1:HE2313; Pilot Width A3:14.00 mm; Center of Bearing from Housing End A2:16.00 mm; Total Height L:205.00 mm;
KOMATSU 22J-57-26130 OPERATOR'S SEAT	A1:18 mm; A2:68.7 mm; A:48 mm; T min.:-20 °C; B:65.1 mm; G:M6x1; S:25.4 mm; Designation of bearing:UC212-36G2; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN;
KOMATSU 56B-86-26070 SEAT	Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm;