KOMATSU 2A5-57-11153 SEAT	A2:42 mm; Designation of closed end cover:SCC206; T max.:100 °C; C0:11.2 kN; Weight:1.12 kg; L:108 mm; B:30 mm; G:R1/8"; C:19.5 kN; A1:12 mm;
KOMATSU 714-07-55410 SEAT	A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm;
KOMATSU 421-S99-3350 SPRING SEAT ASS	Flange Width A1:36.00 mm; Bolt Hole Size N:19.00 mm; Weight:12.1 lb; Pilot Outside Diameter H3:145.00 mm; Shaft Size d:2.25 in; Dynamic Load Rating:12859 lbf; Adapter Sleeve Number1:HE2313; Pilot Width A3:14.00 mm; Center of Bearing from Housing End A2:16.00 mm; Total Height L:205.00 mm;
KOMATSU 3BN-50-12510KF SEAT	H:170 mm; A5:37.3 mm; SW:4.76 mm; T min.:-40 °C; A:48 mm; d1:110 mm; d:80.96 mm; B:74.6 mm; S:37.3 mm; B1:95.2 mm;
KOMATSU 8230-70-5131 SEAT	A2:42 mm; Designation of closed end cover:SCC206; T max.:100 °C; C0:11.2 kN; Weight:1.12 kg; L:108 mm; B:30 mm; G:R1/8"; C:19.5 kN; A1:12 mm;
KOMATSU 426-57-51170 SEAT BELT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;
KOMATSU 273-54-63120 SEAT	A2:42 mm; Designation of closed end cover:SCC206; T max.:100 °C; C0:11.2 kN; Weight:1.12 kg; L:108 mm; B:30 mm; G:R1/8"; C:19.5 kN; A1:12 mm;
KOMATSU 195-57-A0500 SEAT	Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm;