KOMATSU 234-809-9270 SEAT	ra max:0.6 mm; Static load, C0:3.6 kN; Characteristic outer ring frequency, BPF0:2.61 Hz; Characteristic inner ring frequency, BPFI:4.39 Hz; da min:19 mm; Characteristic cage frequency, FTF:0.37 Hz; D:35 mm; Fatigue limit load, Cu:0.16 kN; d:15 mm; Dynamic load, C:7.75 kN;
KOMATSU 56B-86-26070 SEAT	Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:1.020 mm; G1 - Heat Generation Factor (Roller-Raceway):13.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8210 N; WPD:56.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:49300 N; Cg - Geometry Factor:0.0601; da - Cone Frontface Backing Diameter:36.5 mm; K - Factor8:1.56; d:30 mm;
KOMATSU 56B-15-16520 VALVE SEAT	A:36 mm; L1:20 mm; H1:10 mm; d:15 mm; G:M6x1; S:6 mm; H:30.2 mm; B:22 mm; C:9.55 kN; Recommended tightening torque for set screw:3.5 Nm;
KOMATSU 56B-86-16722 SEAT	Weight:13.55 kg; C:96 kN; H:101.6 mm; T min.:-20 °C; N:27mm; B:96 mm; A:85 mm; s1:48 mm; T max.:100 °C; Designation of bearing:UC218G2L3;
KOMATSU 56B-57-51170 SEAT BELT	L1:87 mm; Dz:95 mm; B:41.2 mm; H1:102 mm; C:31.85 kN; N:29mm; Weight:2.32 kg; T min.:-40 °C; A1:16 mm; Z:70.2 mm;
KOMATSU 22B-57-31921 SEAT BELT	H2:114 mm; G:M6x1; B:43.5 mm; J:159 mm; Weight:2.78 kg; Recommended tightening torque for set screw:8 Nm; Z:24.4 mm; T max.:100 °C; d:49.21 mm; N1:25 mm;
KOMATSU 714-23-15131 VALVE SEAT	A2:42 mm; Designation of closed end cover:SCC206; T max.:100 °C; C0:11.2 kN; Weight:1.12 kg; L:108 mm; B:30 mm; G:R1/8"; C:19.5 kN; A1:12 mm;
KOMATSU 56B-15-25110 VALVE SEAT	d:140 mm; D:250 mm; m:460 mm; a:570 mm; l:180 mm; u:36 mm; b:175 mm; d2:137 mm; oil level:55 mm; Material of Housing:grey cast;