PC380LC-6K Slew Motor 706-77-01170	C1 - Dynamic Radial Rating (1 million revolutions)6:82600 lbf; Cone Part Number:67388; G1 - Heat Generation Factor (Roller-Raceway):383.7; K - Factor8:1.7; C90 - Dynamic Radial Rating (90 million revolutions)5:21400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12600 lbf; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:144000 lbf; Design Units:Imperial;
PC450LC-6K-J Slew Motor 706-77-01180	H2:35.0 mm; Seal Type:Labyrinth; J:290.00 mm; Locating Rings (width x OD):SR160X14; Seal:LO315; Material :Cast Iron; A2:158 mm; Housing:SNT 518-615; Cage Type:EJ; Bearing:21315;
PC290LC-8 Slew Motor 706-7G-01041	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Days to Ship:7 Days; Width T(mm):12; Volume Discount:Available; Shape:Flanged Pilot Type; Number of Bearings:Single; Bearing Part Number:6903;
PW220-7K Slew Motor 706-7G-01040	Weight:1.08 kg; Z:30.9 mm; A2:45.4 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; L:92 mm; B:42.9 mm; T max.:100 °C; G:R1/8"; d:34.92 mm;
PC450LC-6K-J Slew Motor 706-77-01301	Category:Bearings; Nlim (oil):8,500 rpm; D:90 mm; Da max:82 mm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.672; d:40 mm; F:52 mm; Characteristic inner ring frequency, BPFI:7.27 Hz; Fatigue limit load, Cu:9.9 kN;
PC340NLC-7K-E0 Slew Motor 706-7K-01040	K - Factor2:1.29; Cg - Geometry Factor:0.074; Y - ISO Factor4:1.32; e - ISO Factor3:0.45; Cup Part Number:02820; Series:02800; G1 - Heat Generation Factor (Roller-Raceway):20.6; r - Cup Backface To Clear Radius1:0.130 in; Da - Cup Frontface Backing Diameter:2.72 in; D:2.8750 in;
PC190LC-8 Slew Motor KBB0440-85015	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Days to Ship:7 Days; Width T(mm):12; Volume Discount:Available; Shape:Flanged Pilot Type; Number of Bearings:Single; Bearing Part Number:6903;
PC340-6K Slew Motor 706-77-01170	Category:Bearings; Nlim (oil):8,500 rpm; D:90 mm; Da max:82 mm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.672; d:40 mm; F:52 mm; Characteristic inner ring frequency, BPFI:7.27 Hz; Fatigue limit load, Cu:9.9 kN;