PC240LC-6K Slew Motor 706-75-01170	Category:Bearings; Nlim (oil):8,500 rpm; D:90 mm; Da max:82 mm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.672; d:40 mm; F:52 mm; Characteristic inner ring frequency, BPFI:7.27 Hz; Fatigue limit load, Cu:9.9 kN;
PC95R-2 USA Slew Motor 708-7S-00220	RoHS:6; Width T(mm):6; Shape:Flange Type; Volume Discount:Available; Number of Bearings:Single; Type:Bearings with Housin; Bearing Retained:No; Bearing Material:[Steel] Steel; Bearing Part Number:623;
PW98MR-6 Slew Motor 708-7S-00280	RoHS:6; Width T(mm):6; Shape:Flange Type; Volume Discount:Available; Number of Bearings:Single; Type:Bearings with Housin; Bearing Retained:No; Bearing Material:[Steel] Steel; Bearing Part Number:623;
PW200-7 Slew Motor 706-7G-01040	D:3.1496 in; Y - ISO Factor3:2.2; C - Cup Width:0.8268 in; Db - Cup Backface Backing Diameter:2.8 in; Design Units:Imperial; Series:335; Da - Cup Frontface Backing Diameter:2.99 in; r - Cup Backface To Clear Radius1:0.090 in; e - ISO Factor2:0.27; Cg - Geometry Factor:0.0676;
PC210NLC-8 Slew Motor 706-7G-01130	Weight:1.08 kg; Z:30.9 mm; A2:45.4 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; L:92 mm; B:42.9 mm; T max.:100 °C; G:R1/8"; d:34.92 mm;
PC160LC-7 Slew Motor KBB0440-85015	Stroke:No; B:36.5; Pillow Type, Category:Standard; Accessory:With steel plate cov; Surface Treatment:No; d:20; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease;
PC210LC-8K Slew Motor 706-7G-01041	Category:Bearings; Nlim (oil):8,500 rpm; D:90 mm; Da max:82 mm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.672; d:40 mm; F:52 mm; Characteristic inner ring frequency, BPFI:7.27 Hz; Fatigue limit load, Cu:9.9 kN;
PW150ES-6K Slew Motor 32P-60-K1183	Note:This product line wa; Bearing Number:HSM260BR; Bearing UPC:013992024152; Dimension N:27.252 in; Bearing - Housing - Seal UPC:013992042583; Cor - Static Load Rating:626992 lbf; Maximum Speed:700 rpm; Bearing Type:Split Cylindrical Re; Dimension H:7.1 in; Dimension V:0.3 in;