KOMATSU 423-22-33310 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU GA409722-0013 HOUSING	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU 56D-23-23122 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 561-22-73115 HOUSING	SW:3.97 mm; Weight:2.38 kg; B:38.1 mm; A1:16 mm; B1:51.6 mm; s1:36.55 mm; L:150 mm; H1:100 mm; N:30mm; d:36.51 mm;
KOMATSU 56C-22-13114 HOUSING	Bearing number:6308-2Z; Size (mm):40x90x23; Bore Diameter (mm):40; Outer Diameter (mm):90; Width (mm):23; d:40 mm; D:90 mm; B:23 mm; C:23 mm; r1 min.:1,5 mm; r2 min.:1,5 mm; Weight:0,632 Kg; Basic dynamic load rating (C):40,8 kN; Basic static load rating (C0):24 kN;
KOMATSU 56D-23-23121 HOUSING	Weight / Kilogram:1.85; B:31 mm; Da max:119 mm; Characteristic rolling element frequency, BSF:4.86 Hz; Fatigue limit load, Cu:19.1 kN; da max:75 mm; Mass (without HJ ring):1.83 kg; dc min:86 mm; Inventory:0.0; ra max:2 mm;
KOMATSU 14X-15-51150 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 6252-21-4170 HOUSING	Bolt Hole Width:0.875 in; D:2.3750 in; H:11.5625 in; Housing Only2:SAF030K x 5-1/4; E Min.:14.6250 in; E Max.:16.0000 in; F:3.25 in; A:6.00 in; Bearing Number:23030K; Diameter S-1:5 1/4 in;