KOMATSU 6506-21-4230 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU GA410401-0038 HOUSING	Days to Ship:8 Days; Width T(mm):11; Flange Shape:Square Type; Bearing I.D. d(mm):12; Bearing Material:Stainless Steel; Bearing Part Number:6901; Shape:Flanged Pilot Type; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin;
KOMATSU 415-22-23230 HOUSING	Min operating temperature, Tmin:-30 °C; Radial clearance class:C3; Max operating temperature, Tmax:175 °C; Nlim (grease):4,300 rpm; Da max:149 mm; Characteristic cage frequency, FTF:0.38 Hz; Static load, C0:77 kN; B:37 mm; f0:13.2; D:160 mm;
KOMATSU 714-23-12612 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU 561-15-71151 HOUSING	mounting:Two-Bolt Base; B:82 mm; d:45 mm; radial dynamic load capacity:3350 kgf; bore type:Round; radial static load capacity:2090 kgf; base to bore centerline:54 mm; base width:54 mm; duty type:Normal Duty; D:137 mm to 156 mm; housing material:Cast Iron; bolt size:M14; locking device:Set Screw; lubrication type:Lubrication Fitting; seal type:Contact with Slinger; end type:2 Open Covers; expansion type:Non-Expansion Bearing (Fixed);
KOMATSU 56D-27-13111 HOUSING	Z:45 mm; Designation of housing:P203N-; C0:4.78 kN; S:6 mm; Designation of bearing:US202G2T04; L1:42 mm; B:22 mm; C:9.55 kN; J:95 mm; T min.:-40 °C;
KOMATSU 6502-51-0010 HOUSING	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU 154-15-61140 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;