KOMATSU SP312821 HOUSING	Seals:DD (Contact Rubber S; Bearing Retained:No; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Number of Bearings:Double; Bearing Part Number:6201; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12;
KOMATSU 562-15-71181 HOUSING	G:M6x1; T min.:-20 °C; Designation of bearing:ES212G2T20; B1:49.3 mm; A1:44 mm; C:52.5 kN; Designation of housing:P212N-; Recommended tightening torque for set screw:22 Nm; N:20mm; Dz:120 mm;
KOMATSU 6505-51-0011 HOUSING	SW:3.97 mm; Weight:2.38 kg; B:38.1 mm; A1:16 mm; B1:51.6 mm; s1:36.55 mm; L:150 mm; H1:100 mm; N:30mm; d:36.51 mm;
KOMATSU 56B-15-12492 HOUSING ASS'Y	Weight / Kilogram:1.85; B:31 mm; Da max:119 mm; Characteristic rolling element frequency, BSF:4.86 Hz; Fatigue limit load, Cu:19.1 kN; da max:75 mm; Mass (without HJ ring):1.83 kg; dc min:86 mm; Inventory:0.0; ra max:2 mm;
KOMATSU ND094110-0210 HOUSING ASS'Y	Min operating temperature, Tmin:-30 °C; Radial clearance class:C3; Max operating temperature, Tmax:175 °C; Nlim (grease):4,300 rpm; Da max:149 mm; Characteristic cage frequency, FTF:0.38 Hz; Static load, C0:77 kN; B:37 mm; f0:13.2; D:160 mm;
KOMATSU 175-15-42413 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 6217-81-4900 HOUSING ASS'Y	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 415-23-13114 HOUSING	Weight:2.38 kg; Designation of bearing:EX207-23G2T20; Designation of housing:PH207-; Recommended tightening torque for set screw:8 Nm; H:95 mm; L:167 mm; T min.:-20 °C; S:18.8 mm; L1:56 mm; G:M6x1;