KOMATSU DK134062-3120 HOUSING	SW:3.97 mm; Weight:2.38 kg; B:38.1 mm; A1:16 mm; B1:51.6 mm; s1:36.55 mm; L:150 mm; H1:100 mm; N:30mm; d:36.51 mm;
KOMATSU 23B-27-71241 HOUSING	Bore Size d:40 mm; Oil Limiting Speed:5000 rpm; Cr - Dynamic Load Rating:2.5 kN; Weight:0.021 Kg; Clearance:C3; Outside Ring Width B:6.000 mm; C0r - Static Load Rating:2.2 kN; Radius Rs min:0.300 mm; Grease Limiting Speed:4300 rpm; Features:Contact Seals;
KOMATSU 195-49-34230 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 56D-15-12340 HOUSING	Z:45 mm; Designation of housing:P203N-; C0:4.78 kN; S:6 mm; Designation of bearing:US202G2T04; L1:42 mm; B:22 mm; C:9.55 kN; J:95 mm; T min.:-40 °C;
KOMATSU 21T-27-71142 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU 423-23-33420 HOUSING	SW:3.97 mm; Weight:2.38 kg; B:38.1 mm; A1:16 mm; B1:51.6 mm; s1:36.55 mm; L:150 mm; H1:100 mm; N:30mm; d:36.51 mm;
KOMATSU 6738-21-4111 HOUSING	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU 425-22-23300 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;