KOMATSU 423-22-33410 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 6262-21-4750 HOUSING	Bolt Hole Width:0.875 in; D:2.3750 in; H:11.5625 in; Housing Only2:SAF030K x 5-1/4; E Min.:14.6250 in; E Max.:16.0000 in; F:3.25 in; A:6.00 in; Bearing Number:23030K; Diameter S-1:5 1/4 in;
KOMATSU 815-06-11110 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 3EA-21-52110KF HOUSING	Outer Ring Shape:Flat; Rolling Element Material:Steel; d:12; Specifications/Environment:Standard; Basic Dynamic Load Rating(N):8200; Types:7*** series; Precision:Grade 0; Load Direction:Radial; Inner/Outer Ring Material:Steel;
KOMATSU 23B-22-31521 HOUSING	Weight / Kilogram:1.85; B:31 mm; Da max:119 mm; Characteristic rolling element frequency, BSF:4.86 Hz; Fatigue limit load, Cu:19.1 kN; da max:75 mm; Mass (without HJ ring):1.83 kg; dc min:86 mm; Inventory:0.0; ra max:2 mm;
KOMATSU 708-7S-21520 HOUSING	Seals:DD (Contact Rubber S; Bearing Retained:No; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Number of Bearings:Double; Bearing Part Number:6201; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12;
KOMATSU 714-24-22571 HOUSING	Min operating temperature, Tmin:-30 °C; Radial clearance class:C3; Max operating temperature, Tmax:175 °C; Nlim (grease):4,300 rpm; Da max:149 mm; Characteristic cage frequency, FTF:0.38 Hz; Static load, C0:77 kN; B:37 mm; f0:13.2; D:160 mm;
KOMATSU 562-13-57121 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;