KOMATSU 6502-30-8610 HOUSING	Bore Size d:40 mm; Oil Limiting Speed:5000 rpm; Cr - Dynamic Load Rating:2.5 kN; Weight:0.021 Kg; Clearance:C3; Outside Ring Width B:6.000 mm; C0r - Static Load Rating:2.2 kN; Radius Rs min:0.300 mm; Grease Limiting Speed:4300 rpm; Features:Contact Seals;
KOMATSU 415-23-23310 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 14X-15-51150 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 195-13-73161 HOUSING	Bore Size d:40 mm; Oil Limiting Speed:5000 rpm; Cr - Dynamic Load Rating:2.5 kN; Weight:0.021 Kg; Clearance:C3; Outside Ring Width B:6.000 mm; C0r - Static Load Rating:2.2 kN; Radius Rs min:0.300 mm; Grease Limiting Speed:4300 rpm; Features:Contact Seals;
KOMATSU 6506-21-4230 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU 427-20-15111 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 23B-27-71151 HOUSING	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU 17A-15-00750 HOUSING ASS'Y	Weight:2.38 kg; Designation of bearing:EX207-23G2T20; Designation of housing:PH207-; Recommended tightening torque for set screw:8 Nm; H:95 mm; L:167 mm; T min.:-20 °C; S:18.8 mm; L1:56 mm; G:M6x1;