KOMATSU 714-23-12611 HOUSING	Weight / Kilogram:1.85; B:31 mm; Da max:119 mm; Characteristic rolling element frequency, BSF:4.86 Hz; Fatigue limit load, Cu:19.1 kN; da max:75 mm; Mass (without HJ ring):1.83 kg; dc min:86 mm; Inventory:0.0; ra max:2 mm;
KOMATSU 23S-22-48720 HOUSING	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU 154-15-61132 HOUSING	Bolt Hole Width:0.875 in; D:2.3750 in; H:11.5625 in; Housing Only2:SAF030K x 5-1/4; E Min.:14.6250 in; E Max.:16.0000 in; F:3.25 in; A:6.00 in; Bearing Number:23030K; Diameter S-1:5 1/4 in;
KOMATSU 56B-27-13114 HOUSING	Seals:DD (Contact Rubber S; Bearing Retained:No; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Number of Bearings:Double; Bearing Part Number:6201; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12;
KOMATSU 3EE-15-12510KF HOUSING 1	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 6506-21-2040 HOUSING	Weight:2.38 kg; Designation of bearing:EX207-23G2T20; Designation of housing:PH207-; Recommended tightening torque for set screw:8 Nm; H:95 mm; L:167 mm; T min.:-20 °C; S:18.8 mm; L1:56 mm; G:M6x1;
KOMATSU 21J-23-11910 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 23B-70-16260 HOUSING	Outer Ring Shape:Flat; Rolling Element Material:Steel; d:12; Specifications/Environment:Standard; Basic Dynamic Load Rating(N):8200; Types:7*** series; Precision:Grade 0; Load Direction:Radial; Inner/Outer Ring Material:Steel;