KOMATSU DK154002-3320 HOUSING	Min operating temperature, Tmin:-30 °C; Radial clearance class:C3; Max operating temperature, Tmax:175 °C; Nlim (grease):4,300 rpm; Da max:149 mm; Characteristic cage frequency, FTF:0.38 Hz; Static load, C0:77 kN; B:37 mm; f0:13.2; D:160 mm;
KOMATSU 426-15-41193 HOUSING	G:M6x1; T min.:-20 °C; Designation of bearing:ES212G2T20; B1:49.3 mm; A1:44 mm; C:52.5 kN; Designation of housing:P212N-; Recommended tightening torque for set screw:22 Nm; N:20mm; Dz:120 mm;
KOMATSU 23B-27-71251 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU 6934-61-1310 HOUSING	Bore Size d:40 mm; Oil Limiting Speed:5000 rpm; Cr - Dynamic Load Rating:2.5 kN; Weight:0.021 Kg; Clearance:C3; Outside Ring Width B:6.000 mm; C0r - Static Load Rating:2.2 kN; Radius Rs min:0.300 mm; Grease Limiting Speed:4300 rpm; Features:Contact Seals;
KOMATSU 423-22-33521 HOUSING	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU 56B-13-17121 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 23B-70-52250 HOUSING	Bolt Hole Width:0.875 in; D:2.3750 in; H:11.5625 in; Housing Only2:SAF030K x 5-1/4; E Min.:14.6250 in; E Max.:16.0000 in; F:3.25 in; A:6.00 in; Bearing Number:23030K; Diameter S-1:5 1/4 in;
KOMATSU 235-70-15190 HOUSING	Weight / Kilogram:1.85; B:31 mm; Da max:119 mm; Characteristic rolling element frequency, BSF:4.86 Hz; Fatigue limit load, Cu:19.1 kN; da max:75 mm; Mass (without HJ ring):1.83 kg; dc min:86 mm; Inventory:0.0; ra max:2 mm;