KOMATSU 418-22-23210 HOUSING	Bearing number:4T-15126/15245; Size (mm):31.75x62x19.05; Bore Diameter (mm):31,75; Outer Diameter (mm):62; Width (mm):19,05; d:31,75 mm; D:62 mm; T:19,05 mm; B:20,638 mm; C:14,288 mm; ra1 max.:1,3 mm; a:6 mm; Da:55 mm; db:36,5 mm; ra max.:0,8 mm; da:37 mm; Db:58 mm; Weight:0,255 Kg; Basic dynamic load rating (C):46,5 kN; Basic static load rating (C0):54 kN; (Grease) Lubrication Speed:6 100 r/min; (Oil) Lubrication Speed:8 200 r/min;
KOMATSU 6275-11-6150 HOUSING	SW:3.97 mm; Weight:2.38 kg; B:38.1 mm; A1:16 mm; B1:51.6 mm; s1:36.55 mm; L:150 mm; H1:100 mm; N:30mm; d:36.51 mm;
KOMATSU 562-13-53110 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU 6246-21-4140 HOUSING	G:M6x1; T min.:-20 °C; Designation of bearing:ES212G2T20; B1:49.3 mm; A1:44 mm; C:52.5 kN; Designation of housing:P212N-; Recommended tightening torque for set screw:22 Nm; N:20mm; Dz:120 mm;
KOMATSU 6502-51-2020 HOUSING	Z:45 mm; Designation of housing:P203N-; C0:4.78 kN; S:6 mm; Designation of bearing:US202G2T04; L1:42 mm; B:22 mm; C:9.55 kN; J:95 mm; T min.:-40 °C;
KOMATSU 6151-22-6410 HOUSING	Weight:2.38 kg; Designation of bearing:EX207-23G2T20; Designation of housing:PH207-; Recommended tightening torque for set screw:8 Nm; H:95 mm; L:167 mm; T min.:-20 °C; S:18.8 mm; L1:56 mm; G:M6x1;
KOMATSU 6217-81-4910 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 566-22-43103 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;