KOMATSU 714-12-22582 HOUSING	SW:3.97 mm; Weight:2.38 kg; B:38.1 mm; A1:16 mm; B1:51.6 mm; s1:36.55 mm; L:150 mm; H1:100 mm; N:30mm; d:36.51 mm;
KOMATSU 6742-01-3140CS HOUSING. COMPRESSOR	Min operating temperature, Tmin:-30 °C; Radial clearance class:C3; Max operating temperature, Tmax:175 °C; Nlim (grease):4,300 rpm; Da max:149 mm; Characteristic cage frequency, FTF:0.38 Hz; Static load, C0:77 kN; B:37 mm; f0:13.2; D:160 mm;
KOMATSU YM129917-01500KF HOUSING ASS'Y	Seals:DD (Contact Rubber S; Bearing Retained:No; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Number of Bearings:Double; Bearing Part Number:6201; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12;
KOMATSU 6506-21-4330 HOUSING	Min operating temperature, Tmin:-30 °C; Radial clearance class:C3; Max operating temperature, Tmax:175 °C; Nlim (grease):4,300 rpm; Da max:149 mm; Characteristic cage frequency, FTF:0.38 Hz; Static load, C0:77 kN; B:37 mm; f0:13.2; D:160 mm;
KOMATSU DK134062-3120 HOUSING	SW:3.97 mm; Weight:2.38 kg; B:38.1 mm; A1:16 mm; B1:51.6 mm; s1:36.55 mm; L:150 mm; H1:100 mm; N:30mm; d:36.51 mm;
KOMATSU 6553-51-1100 HOUSING ASS'Y	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU DK134051-5720 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU 56D-23-23121 HOUSING	Bolt Hole Width:0.875 in; D:2.3750 in; H:11.5625 in; Housing Only2:SAF030K x 5-1/4; E Min.:14.6250 in; E Max.:16.0000 in; F:3.25 in; A:6.00 in; Bearing Number:23030K; Diameter S-1:5 1/4 in;