KOMATSU 419-23-33810 HOUSING	Weight / Kilogram:1.85; B:31 mm; Da max:119 mm; Characteristic rolling element frequency, BSF:4.86 Hz; Fatigue limit load, Cu:19.1 kN; da max:75 mm; Mass (without HJ ring):1.83 kg; dc min:86 mm; Inventory:0.0; ra max:2 mm;
KOMATSU 569-13-73131 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 195-13-73161 HOUSING	Bore Size d:40 mm; Oil Limiting Speed:5000 rpm; Cr - Dynamic Load Rating:2.5 kN; Weight:0.021 Kg; Clearance:C3; Outside Ring Width B:6.000 mm; C0r - Static Load Rating:2.2 kN; Radius Rs min:0.300 mm; Grease Limiting Speed:4300 rpm; Features:Contact Seals;
KOMATSU 6219-21-4210 HOUSING	d:1-7/16 in; seal type:Contact/Lip; D:4.3281 in; overall depth:2-7/8 in; B:6.2500 in; radial dynamic load capacity:15900 lb; flange mounting type:Three-Bolt Round; radial static load capacity:16000 lb; bearing type:Spherical Roller; maximum rpm:3300 RPM; bore type:Round; finish/coating:Powder Coated; housing material:Cast Iron; lubrication type:Lubrication Fitting; locking device:Concentric Collar;
KOMATSU DK154003-1520 HOUSING	Bolt Hole Width:0.875 in; D:2.3750 in; H:11.5625 in; Housing Only2:SAF030K x 5-1/4; E Min.:14.6250 in; E Max.:16.0000 in; F:3.25 in; A:6.00 in; Bearing Number:23030K; Diameter S-1:5 1/4 in;
KOMATSU 56B-22-13130 HOUSING	G:M6x1; T min.:-20 °C; Designation of bearing:ES212G2T20; B1:49.3 mm; A1:44 mm; C:52.5 kN; Designation of housing:P212N-; Recommended tightening torque for set screw:22 Nm; N:20mm; Dz:120 mm;
KOMATSU 573-22-53101 HOUSING	db - Cone Backface Backing Diameter:103 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:42200 lbf; C0 - Static Radial Rating:483000 N; Series:33217; B - Cone Width:49.000 mm; Design Units:METRIC; Cg - Geometry Factor:0.0995; Aa - Cage-Cone Backface Clearance:4.8 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):167.6;
KOMATSU 6502-13-1411 BLOWER HOUSING	Bore Size d:40 mm; Oil Limiting Speed:5000 rpm; Cr - Dynamic Load Rating:2.5 kN; Weight:0.021 Kg; Clearance:C3; Outside Ring Width B:6.000 mm; C0r - Static Load Rating:2.2 kN; Radius Rs min:0.300 mm; Grease Limiting Speed:4300 rpm; Features:Contact Seals;