KOMATSU 56D-15-12320 HOUSING	Recommended tightening torque for set screw:22 Nm; L:143 mm; d:50 mm; Weight:2.5 kg; T max.:200 °C; T min.:-20 °C; C0:23.2 kN; S:19 mm; B:51.6 mm; A:40 mm;
KOMATSU 23B-27-71151 HOUSING	Category:Mounted Cartridge Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:23.61; Product Group:M06288; Mounting Method:V Lock; Housing Style:Cartridge Unit; Housing Material:Cast Steel; Rolling Element:Spherical Roller Bearing; Expansion / Non-expansion:Non-expansion; Relubricatable:Yes; Insert Part Number:22226; Seals:Double Lip Contact; Other Features:Double Row | Double Nut | Nitrile Rubber Seal;
KOMATSU 3EB-21-52510KF HOUSING	Bolt Hole Width:0.875 in; D:2.3750 in; H:11.5625 in; Housing Only2:SAF030K x 5-1/4; E Min.:14.6250 in; E Max.:16.0000 in; F:3.25 in; A:6.00 in; Bearing Number:23030K; Diameter S-1:5 1/4 in;
KOMATSU 23E-15-11162 HOUSING	Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Width T(mm):19; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Lateral Width L(mm):76; Number of Bearings:Single; C Chamfered:Not Provided; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea;
KOMATSU 8242-75-2490 HOUSING	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:15.89; Product Group:M06288; Number of Mounting Holes:6; Mounting Method:V Lock; Housing Style:6 Bolt Round Flange Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:1 Inch; Relubricatable:Yes; Insert Part Number:22222; Seals:Double Lip Nitrile Rubber;
KOMATSU 426-15-53290 HOUSING	H:250 mm; J:198 mm; C:71.5 kN; S:25 mm; A:52 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL311-; B:66 mm; A2:71 mm; N:25mm;
KOMATSU 711-80-17111 HOUSING ASS'Y	Weight:2.38 kg; Designation of bearing:EX207-23G2T20; Designation of housing:PH207-; Recommended tightening torque for set screw:8 Nm; H:95 mm; L:167 mm; T min.:-20 °C; S:18.8 mm; L1:56 mm; G:M6x1;
KOMATSU YM129A00-01602 HOUSING	Bore Size d:40 mm; Oil Limiting Speed:5000 rpm; Cr - Dynamic Load Rating:2.5 kN; Weight:0.021 Kg; Clearance:C3; Outside Ring Width B:6.000 mm; C0r - Static Load Rating:2.2 kN; Radius Rs min:0.300 mm; Grease Limiting Speed:4300 rpm; Features:Contact Seals;