Original Rexroth A11VO series Piston Pump R902050289 A11VO130DRS/10L-NSD12K17	RoHS:6; L(mm):3 ～ 100; Surface Treatment:Electroless Nickel P; L Dimension Tolerance:Negative Tolerance; I.D. d(φ):34; Application:For Outer Ring; Days to Ship:7 Days; Material:Low Carbon Steel; O.D. D(φ):37;
Original Rexroth A11VO series Piston Pump R902081839 A11VO130LR3DH1/10R-NZD12N00	L:71 mm; S:7.5 mm; B:27 mm; C0:7.88 kN; C:14 kN; Recommended tightening torque for set screw:3.7 Nm; J:76.2 mm; A:17.5 mm; N:9mm; T min.:-20 °C;
Original Rexroth A11VO series Piston Pump R902081321 A11VLO260HD2/11R-NZD12KXX-S	Bearing Part Number:628; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Seals:ZZ (Double Shield); Bearing I.D. d(mm):8; Days to Ship:7 Days; Holder Surface Treatment:Electroless Nickel P; Width T(mm):30 ～ 50; Bearing Retained:Yes (with retaining;
Original Rexroth A11VO series Piston Pump R902060689 A11VLO130LG2DS/10R-NZD12K83	Da max:246 mm; Number of lubrication holes:3; Nref:2,000 rpm; k:8 mm; Y1:2.09; b:18 mm; Dynamic load, C:1,170 kN; Fatigue limit load, Cu:96.2 kN; B:86 mm; Mass:22.6 kg;
Original Rexroth A11VO series Piston Pump R902031104 A11VLO260LRDS/11R-NZD12N00	Da max:246 mm; Number of lubrication holes:3; Nref:2,000 rpm; k:8 mm; Y1:2.09; b:18 mm; Dynamic load, C:1,170 kN; Fatigue limit load, Cu:96.2 kN; B:86 mm; Mass:22.6 kg;
Original Rexroth A11VO series Piston Pump A11VO75LRS/10R-NSD12K01	Type:Bearings with Housin; Number of Bearings:Single; Height Indication:Height Configurable; Bearing Material:[Steel] Steel; Shape:Bottom Mount; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days;
Original Rexroth A11VO series Piston Pump A11VO60DRG/10L-NZC12N00	H:0.385 in; Major Diameter d:8.628 in; Threads No. per Inch:8; D:1.260 in; C:10.255 in; E:9.531 in; G:0.86 in;
Original Rexroth A11VO series Piston Pump A11VO60DRS/10R-NPC12N00	Dimension N:3.980 in; Dimension F:10.8 in; Shaft Size  :3-11/16 in; Dimension SV:4.13 in; Pre Install Clearance Max:0.0055 in; Y2 - Geometry Factor:3.80; Dimension BC:12.2 in; Engineering Group:Mounted Bearing; Grease Lubrication - B/C/O Seal:600 rpm; Pre Install Clearance Min:0.0043 in;