| Komatsu SUPPORT 6732-61-3120KF SUPPORT | d:180 mm; Cg - Geometry Factor8:0.0987; Bore Taper:1/12; Reference Thermal Speed Rating (Grease):1300; Cage Material:Steel; B - Outer Ring Width:96.000 mm; Y2 - ISO Factor6:2.27; B - Inner Ring Width:96 mm; D:300 mm; Y1 - ISO Factor5:3.45; |
| Komatsu SUPPORT 195-21-32331 SUPPORT | D:32 mm; rs min:0.3 mm; ra max:0.3 mm; Fatigue limit load, Cu:0.13 kN; Characteristic cage frequency, FTF:0.4 Hz; Dynamic load, C:5.6 kN; da max:19 mm; Brand:NTN; da min:17 mm; Characteristic outer ring frequency, BPF0:3.59 Hz; |
| Komatsu SUPPORT 426-03-33632 SUPPORT ASS'Y | Z:22.5 mm; E:22 mm; T max.:100 °C; B:42.9 mm; Designation of housing:PG207N-; C:25.7 kN; G:M6x1; L:100 mm; s1:21.45 mm; Designation of bearing:UC207-23G2T04; |
| Komatsu SUPPORT 195-43-68121 SUPPORT | Holder Surface Treatment:Electroless Nickel P; Days to Ship:7 Days; Shape:Flange Type; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):8; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; |
| Komatsu SUPPORT 19M-30-11242 SUPPORT | e - ISO Factor3:0.33; C1 - Cup Flange Width:0.3750 in; r - Cup Backface To Clear Radius1:0.130 in; D1 - Flange Outer Diameter:7.8710 in; G1 - Heat Generation Factor (Roller-Raceway)5:3800; K - Factor2:1.74; D:7.5 in; Da - Cup Frontface Backing Diameter:6.86 in; Cg - Geometry Factor6:0.107; Y - ISO Factor4:1.79; |
| Komatsu SUPPORT 428-03-21230 SUPPORT | Fatigue limit load, Cu:0.23 kN; Characteristic inner ring frequency, BPFI:5.42 Hz; Min operating temperature, Tmin:-40 °C; rs min:0.6 mm; Dynamic load, C:9.3 kN; d1:26.9 mm; Nlim:29,000 rpm; Max operating temperature, Tmax:120 °C; ra max:0.6 mm; Nref:18,000 rpm; |
| Komatsu SUPPORT 425-46-32161 SUPPORT | d:25 mm; H2:41 mm; s1:17 mm; C:14 kN; C0:7.88 kN; Designation of open end cover:SCO205-25; B:34 mm; Weight:1.54 kg; H:78 mm; T max.:100 °C; |
| Komatsu SUPPORT 426-54-61110 SUPPORT | Fatigue limit load, Cu:0.23 kN; Characteristic inner ring frequency, BPFI:5.42 Hz; Min operating temperature, Tmin:-40 °C; rs min:0.6 mm; Dynamic load, C:9.3 kN; d1:26.9 mm; Nlim:29,000 rpm; Max operating temperature, Tmax:120 °C; ra max:0.6 mm; Nref:18,000 rpm; |