Komatsu STEP 561-54-8A901 STEP	Seals:ZZ (Double Shield); Number of Bearings:Double; Width T(mm):30; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):5; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flange Type; Flange Shape:Round Type;
Komatsu STEP 561-89-85831 STEP	A5:21.4 mm; B1:56.3 mm; SW:3.97 mm; Designation of bearing:EX209-28G2T20; T max.:200 °C; B:42.8 mm; Designation of housing:C209-; C0:20.8 kN; Weight:1.67 kg; C:31.85 kN;
Komatsu STEP 10G-30-27830 STEP	Bearing Weight:1.180 Kg; Limiting Speed (Grease):1000 rpm; R - Inner Ring To Clear Radius2:1.0 mm; Contact Angle:60 º; da - Inner Ring Backing Diameter:122.796 mm; Da - Outer Ring Backing Diameter:123.825 mm; d:101.600 mm; Design Units:METRIC; C0 - Static Radial Rating:115700 N; Ball Type:STEEL;
Komatsu STEP 426-54-35182 STEP	d1:70 mm; J:125 mm; d:44.45 mm; S:19.8 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; C:53 kN; Designation of housing:FS309-; Designation of bearing:EX309-28G2L3; A4:33 mm;
Komatsu STEP 21N-54-34140 STEP	SW:3.97 mm; Recommended tightening torque for set screw:8 Nm; L1:76 mm; s1:36.3 mm; T min.:-20 °C; Weight:1.34 kg; C:25.7 kN; L:122 mm; B1:51.1 mm; L3:40 mm;
Komatsu STEP 195-54-87922 STEP	Min operating temperature, Tmin:-20 °C; D1:90 mm; D:155 mm; B:13.5 mm; Brand:NTN; rs min:1.5 mm; Bearing ring (outer ring) GS mass:1.33 kg; Max operating temperature, Tmax:120 °C;
Komatsu STEP 561-54-86871 STEP	Bearing Material:Stainless Steel; Flange Shape:Square Type; Number of Bearings:Single; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Retained:Yes (with retaining; Housing Material:[Aluminum Alloy] 201;
Komatsu STEP 569-54-8M711 STEP	Min operating temperature, Tmin:-20 °C; D1:90 mm; D:155 mm; B:13.5 mm; Brand:NTN; rs min:1.5 mm; Bearing ring (outer ring) GS mass:1.33 kg; Max operating temperature, Tmax:120 °C;