Komatsu STEP 23C-54-52420 STEP	J:84 mm; H2:100 mm; N:M14; d:38.1 mm; C:29.6 kN; T min.:-20 °C; H:49.2 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; E:20 mm;
Komatsu STEP 208-30-75830 STEP	Bearing Weight:1.180 Kg; Limiting Speed (Grease):1000 rpm; R - Inner Ring To Clear Radius2:1.0 mm; Contact Angle:60 º; da - Inner Ring Backing Diameter:122.796 mm; Da - Outer Ring Backing Diameter:123.825 mm; d:101.600 mm; Design Units:METRIC; C0 - Static Radial Rating:115700 N; Ball Type:STEEL;
Komatsu STEP 206-47-81780 STEP	SW:3.97 mm; Recommended tightening torque for set screw:8 Nm; L1:76 mm; s1:36.3 mm; T min.:-20 °C; Weight:1.34 kg; C:25.7 kN; L:122 mm; B1:51.1 mm; L3:40 mm;
Komatsu STEP 425-54-32251 STEP	SW:3.97 mm; Recommended tightening torque for set screw:8 Nm; L1:76 mm; s1:36.3 mm; T min.:-20 °C; Weight:1.34 kg; C:25.7 kN; L:122 mm; B1:51.1 mm; L3:40 mm;
Komatsu STEP 207-54-82760 STEP	Seals:ZZ (Double Shield); Number of Bearings:Double; Width T(mm):30; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):5; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flange Type; Flange Shape:Round Type;
Komatsu STEP 198-54-79321 STEP	J:84 mm; H2:100 mm; N:M14; d:38.1 mm; C:29.6 kN; T min.:-20 °C; H:49.2 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; E:20 mm;
Komatsu STEP 569-54-88720 STEP	RoHS:6; Basic Dynamic Load Rating(N):11400; Load Direction:Radial; Rolling Element Material:Steel; Outer Ring Shape:Grooved; Size Standards:Metric System; Inner/Outer Ring Material:Steel; d:15;
Komatsu STEP 561-89-86933 STEP	s1:21.45 mm; Designation of housing:FE207N-; L:118 mm; A1:12.5 mm; T max.:100 °C; A:36 mm; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; N:14mm; S:17.5 mm;