Komatsu CYLINDER HEAD A 20D-63-22540 CYLINDER	Bearing with/without cage:Avec; C0r:1.69 kN; B2:11 mm; Lw:4.8 mm; d1:4 mm; G1:6 mm; B:9 mm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:2.67 Hz; D:12 mm;
Komatsu CYLINDER HEAD A 707-29-90A40 CYLINDER HEAD	Nref:3,000 rpm; d2:141.9 mm; Associated sleeve reference:H3124; Characteristic outer ring frequency, BPF0:7.62 Hz; Nlim:3,800 rpm; Number of lubrication holes:3; B:58 mm; Da max:203 mm; Characteristic cage frequency, FTF:0.42 Hz; D1:192.3 mm;
Komatsu CYLINDER HEAD A 37A-1JA-5111UNKF TILT CYLINDER A	Designation of housing:PLE207N-; N:14mm; s1:22.5 mm; H:46.2 mm; H2:91.5 mm; H1:16 mm; d1:52 mm; A1:30.5 mm; Weight:1.44 kg; T max.:100 °C;
Komatsu CYLINDER HEAD A 30B-64-11110KF CYLINDER	C:43.55 kN; Designation of housing:FL211-; d:50.8 mm; A:43 mm; Recommended tightening torque for set screw:8 Nm; L:130 mm; Weight:3 kg; A2:58.5 mm; N:19mm; J:184 mm;
Komatsu CYLINDER HEAD A 37B-1JA-5315UNKF TILT CYLINDER A	Weight / Kilogram:8.03; r1s min:3 mm; Radial clearance class:C3; F:127.5 mm; Category:Bearings; Inventory:0.0; Product Group:B04144; Max operating temperature, Tmax:120 °C; Dynamic load, C:380 kN; Mass (without HJ ring):7.71 kg;
Komatsu CYLINDER HEAD A 23A-43-13250 CYLINDER	L3:33.5 mm; Appropriate Locknut No.:HM3152; i:25.5 mm; L2:12 mm; S:24 mm; t1:4 mm; S1:12 mm;
Komatsu CYLINDER HEAD A 23D-63-22141 CYLINDER	Series:LM245100; Bearing Weight:43.80 lb; Design Units:Imperial; D:12.25 in; T - Bearing Width across Cups:3.7500 in; Cup Part Number:LM245110; Aa - Cage-Cone Backface Clearance:0 in; Db - Cup Backface Backing Diameter:11.54 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:54700 lbf; Y1 - ISO Factor9:2.03;
Komatsu CYLINDER HEAD A 421-S95-HP94 CYLINDER	Bearing with/without cage:Avec; C0r:1.69 kN; B2:11 mm; Lw:4.8 mm; d1:4 mm; G1:6 mm; B:9 mm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:2.67 Hz; D:12 mm;