Komatsu DUCT 56B-84-3B520 DUCT	D:500.000 mm; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Oil)7:760; Cage Material:Brass; C0 - Static Radial Rating:5120000 N; Bore Taper:1/12; B - Outer Ring Width:160.000 mm; Y1 - ISO Factor5:3.35; Y2 - ISO Factor6:2.2; R - Inner Ring To Clear Radius1:4.000 mm;
Komatsu DUCT 56B-07-12511 DUCT	Width T(mm):15; C Chamfered:Provided; Bearing Part Number:6200; Height Indication:Height Configurable; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single;
Komatsu DUCT 426-07-52120 DUCT	D:500.000 mm; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Oil)7:760; Cage Material:Brass; C0 - Static Radial Rating:5120000 N; Bore Taper:1/12; B - Outer Ring Width:160.000 mm; Y1 - ISO Factor5:3.35; Y2 - ISO Factor6:2.2; R - Inner Ring To Clear Radius1:4.000 mm;
Komatsu DUCT 20Y-53-17920 DUCT	Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):15400; Stroke:No; Diameter series symbol:Used for Light load; Pillow Type, Category:Standard; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Days to Ship:Quote; Fit:J7;
Komatsu DUCT 20Y-53-17940 DUCT	Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; Accessory:No Cover; Days to Ship:Quote; Basic Load Rating, Static Rating(N):105000; Bearing Unit, Type:Round flange shape; Grease Type:SH33M; Stroke:No;
Komatsu DUCT 196-911-3560 DUCT	T min.:-20 °C; B:21.4 mm; L1:25 mm; N:M10; Designation of bearing:ES205G2; Dz:60 mm; H1:15 mm; Designation of open end cover:SCOE205-25; L:75 mm; C0:7.88 kN;
Komatsu DUCT 20Y-977-6522 DUCT	D:500.000 mm; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Oil)7:760; Cage Material:Brass; C0 - Static Radial Rating:5120000 N; Bore Taper:1/12; B - Outer Ring Width:160.000 mm; Y1 - ISO Factor5:3.35; Y2 - ISO Factor6:2.2; R - Inner Ring To Clear Radius1:4.000 mm;
Komatsu DUCT 56B-54-29511 DUCT	N:11mm; d:17.46 mm; N1:17 mm; T min.:-20 °C; H2:63.7 mm; H:31.8 mm; A:32 mm; H1:12.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PLE204-;