Komatsu DUCT 198-911-6560 DUCT	Width T(mm):15; C Chamfered:Provided; Bearing Part Number:6200; Height Indication:Height Configurable; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single;
Komatsu DUCT 154-54-77441 DUCT	D:500.000 mm; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Oil)7:760; Cage Material:Brass; C0 - Static Radial Rating:5120000 N; Bore Taper:1/12; B - Outer Ring Width:160.000 mm; Y1 - ISO Factor5:3.35; Y2 - ISO Factor6:2.2; R - Inner Ring To Clear Radius1:4.000 mm;
Komatsu DUCT 56B-54-3A161 DUCT	Dimension L:6.61 in; e - Geometry Factor:0.23; Grease Lubrication - M/N Seal:2200 rpm; Dimension D:5.25 in; Dimension M:2 in; Dimension KA:1.13 in; C0 - Static Load:31900 lb; Shaft Tolerance:0.0015 in; Dimension P:3.75 in; Housing Style:Take-Up;
Komatsu DUCT 154-54-77441 DUCT	N:11mm; d:17.46 mm; N1:17 mm; T min.:-20 °C; H2:63.7 mm; H:31.8 mm; A:32 mm; H1:12.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PLE204-;
Komatsu DUCT 195-01-36190 DUCT	Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):15400; Stroke:No; Diameter series symbol:Used for Light load; Pillow Type, Category:Standard; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Days to Ship:Quote; Fit:J7;
Komatsu DUCT 21N-54-13610 DUCT	B:53.7 mm; H1:15 mm; J:114 mm; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; C0:32.8 kN; A1:36 mm; Designation of housing:PA212-; E:25 mm; s1:26.85 mm;
Komatsu DUCT 14X-Z11-9581 DUCT ASS'Y	N:11mm; d:17.46 mm; N1:17 mm; T min.:-20 °C; H2:63.7 mm; H:31.8 mm; A:32 mm; H1:12.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PLE204-;
Komatsu DUCT 154-01-31280 DUCT	Unit:Metric Series; Inner Ring:Provided; Basic Load Rating Cr (Dynamic)(kN):3.33; Roller Follower Type:Non-Separate; Roller Type:Crowned Type; Roller Lining:None; Volume Discount:Available; Category:Roller Follower; Allowable Rotational Speed(rpm):8000; d:6;